Email us Сallback
Manufacturer of high-pressure jetting units "POSEIDON".
The equipment for repair, inspection, cleaning and installation of pipelines.
8-800-555-79-97
Сallback

Series of Poseidon DT100S apparatus, 180-250 bar, 130-200 l/min

Manufacturer: Z-Techno (Russia)

Application:

Poseidon waterjet equipment is an available and modern solution of cleaning tasks. Due to the use of breakthrough Warthog slow rotation nozzles, the waterjet equipment is capable of cleaning the most heavily contaminated sewers.

Wide scope of application in all sectors of industry, agriculture, housing and utilities, construction and car service:

  • Hydrodynamic flushing and cleaning of sewers and other pipes
  • Washing and waterjet cleaning of any surfaces, including their preparation for coating
  • Washing vehicles (train cars, light vehicles and trucks, agriculture and construction machinery and self-propelled vehicles)
  • Cleaning and disinfection of floors, surfaces and equipment at food industry enterprises (meat plants, dairy factories, confectionery industry)
  • Washing of surfaces at livestock farms, poultry houses, pig farms
  • Cleaning of garbage chutes in buildings
  • Washing and removal of stucco, paint from building facades, recovery of facing slabs
  • Washing works at construction sites, cleaning of construction framework
  • Cleaning of roads, bridges, tunnels from contaminations, old coatings, insulation and congealed cement solution
  • Removal of bark from lumber
  • Washing of floors and outdoor sites
  • Washing of tanks and vessels

Contracted price In stock

Delivery worldwide.
Add to basket
Consultation
Send order

Technical details:

Water supplyTechnical water, max. 60°С (recomended - max. 45°С)
Apparatus parameters, bar@l/min (МPа@m3/h)180 bar 200 l/min(18 МPа 12 m3/h)200 bar 160 l/min(20 МPа 9.6 m3/h)250 bar 130 l/min(25 МPа 7.8 m3/h)
High pressure hose90 meters long DN 25 mm90 meters long DN 19 mm
Pressure adjustmentAvailable, fine (adjusting valve, By-pass system)
High pressure pumpThree ceramic plungers, crank-and-rod (Italy), with nickel-plated water end.
High pressure pump protectionPump dry run protection
HP pump drive typeBelt-type
Engine4-cylinder diesel engine with water cooling and turbocompressor Kubota (Japan).
  • Power – 96 hp (71 kW).
  • Fitted with oil pressure drop protection. 
  • Fuel consumption - 17.0 l/h.
Fuel tankMetal, volume of 35 litres. Equipped with an oil level indicator on the control panel that allows monitoring oil level in the tank thus avoiding emergency engine shutdown.
Engine cooling and water heatingWater heat exchanger (without radiator) utilizing the heat generated by an engine for heating of water, which enhances the apparatus performance, especially in cold weather.
Climatic designSystem of filling pump and HP main line with antifreeze to protect against freezing in cold weather
Reel for HP hose

With direct drive (without a chain), which provides superior reliability and tremendous power characteristics.

Traction force – 250 kgf.

Reinforced reel with one-piece sidewalls, hydraulic drive and fine rotation speed adjustment. Hydraulic brake.

Reel material – steel, powder coating. Equipped with automatic hose chain

Upon request, design with reel electrodrive with variable rotation speed (Electric option)

Water tank and tank filling and drainage system1,000-litre tank, with a drain gauge that automatically shuts down the engine. The tank filling system with a bayonet-type inlet located on the operator side. Water drain from tank to operating side.
Suction hoseMax. 50 meters long, DN19 mm (FR option)
Reel for suction hoseStationary, hand-driven, accommodates hose up to 50 meters long and DN 19 mm (FR option)
DesignVehicle-mounted frame. Power unit on shock mounts.
Water heatingDiesel boiler, 130 kW, 110,000 kcal/h (Th130 option)
Nozzles are included (in "Reel" delivery setTwo enhanced ZET nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚ (optimal angle for this flow), with or no front jet
WarrantyWarranty for engine – 5 years, for apparatus – 2 years

Description:

Features:

Authorization from pump manufacturer

UDOR (Italy)
  • Noiseless operation due to the possibility of assembling the apparatus in an isothermal and soundproof van (no need to start the basic chassis engine).
  • Independent engine that allows reaching high parameters of pressure and flow without loading the car engine.
  • Plunger high-pressure pump with low frequency of crank shaft rotation (has a longer life).
  • System of utilization of heat produced by the engine allows heating water, which expands geographic application and requires less time for cleaning actions.
  • Standard delivery set includes a reel on hydraulic revolution door leaf, with hydraulic fixation in any working position, hydraulic drive and rotation speed control.
  • Installation of extra tanks of any volumes (depends on your chassis load capacity).

Recommended accessories:


Top guising roller
Protects a high-pressure sleeve from damages and premature wear at the time it enters a sewage well or drain shaft (to be installed on the top edge of the pit cover)

Protective sleeve for HP hose
Protects HP sleeve from damages and premature wear at the time it enters a pipe (it is set in the place where well walls mate the pipe being cleaned). It has a bright color and is fitted with clamping device.

Grenade tip/Bomb

Outstanding clog busting characteristics due to the smaller slant angle of output water jet, which ensures high output speed.

Application: removal of loose stony deposits, gravel, and soft deposits, preparation before use of special nozzles, flushing of pipes coming from structures to a main pipeline.


Chisel tip

Forward jets wash out softer deposits; wedge-shaped design improves its penetration performance and allows for a more efficient removal of clogging; rear water jet provides for thrust and pipe flushing.

Application: cleaning of pipes from intertwined roots, freeing of frozen pipelines from buildings to a main pipeline.


Fluke bottom tip

Its heaviness and rear-located nozzles allow efficiently washing out debris from the pipe bottom.

Application: for cleaning of sand, pebble, stone and sludge deposits


Aquadrill tip with forward rotary jet

The tip features a powerful rotating front nozzle, which is especially effective when removing blockages and cleaning of fully clogged pipes.

Application: removal of heavy clogging (blockages)

 


StoneAge Warthog slow rotation rotary tip (USA).

Due to slow rotation and leakproofness, water creates a local region of high pressure on the surface of deposit and by penetrating inside tears apart the contamination structure from inside

Application: for elimination of emergency blockages

 

Video

,
,

Basic configurations

Poseidon DT100S-200-160-Ku-Reel

High pressure cleaner POSEIDON on Skid frame (Kubota 100hp, pump UDOR (Italy), hydraulic drive hose reel, 19mm х 90m HP hose, 2 pipe cleaning nozzles, 1,000-litre water tank)

Working weight, kg

920.0

Contracted price

Technical details:

Water supplyTechnical water, max. 60°С (recomended - max. 45°С)
Apparatus parameters, bar@l/min (МPа@m3/h)180 bar 200 l/min(18 МPа 12 m3/h)200 bar 160 l/min(20 МPа 9.6 m3/h)250 bar 130 l/min(25 МPа 7.8 m3/h)
High pressure hose90 meters long DN 25 mm90 meters long DN 19 mm
Pressure adjustmentAvailable, fine (adjusting valve, By-pass system)
High pressure pumpThree ceramic plungers, crank-and-rod (Italy), with nickel-plated water end.
High pressure pump protectionPump dry run protection
HP pump drive typeBelt-type
Engine4-cylinder diesel engine with water cooling and turbocompressor Kubota (Japan).
  • Power – 96 hp (71 kW).
  • Fitted with oil pressure drop protection. 
  • Fuel consumption - 17.0 l/h.
Fuel tankMetal, volume of 35 litres. Equipped with an oil level indicator on the control panel that allows monitoring oil level in the tank thus avoiding emergency engine shutdown.
Engine cooling and water heatingWater heat exchanger (without radiator) utilizing the heat generated by an engine for heating of water, which enhances the apparatus performance, especially in cold weather.
Climatic designSystem of filling pump and HP main line with antifreeze to protect against freezing in cold weather
Reel for HP hose

With direct drive (without a chain), which provides superior reliability and tremendous power characteristics.

Traction force – 250 kgf.

Reinforced reel with one-piece sidewalls, hydraulic drive and fine rotation speed adjustment. Hydraulic brake.

Reel material – steel, powder coating. Equipped with automatic hose chain

Upon request, design with reel electrodrive with variable rotation speed (Electric option)

Water tank and tank filling and drainage system1,000-litre tank, with a drain gauge that automatically shuts down the engine. The tank filling system with a bayonet-type inlet located on the operator side. Water drain from tank to operating side.
Suction hoseMax. 50 meters long, DN19 mm (FR option)
Reel for suction hoseStationary, hand-driven, accommodates hose up to 50 meters long and DN 19 mm (FR option)
DesignVehicle-mounted frame. Power unit on shock mounts.
Water heatingDiesel boiler, 130 kW, 110,000 kcal/h (Th130 option)
Nozzles are included (in "Reel" delivery setTwo enhanced ZET nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚ (optimal angle for this flow), with or no front jet
WarrantyWarranty for engine – 5 years, for apparatus – 2 years

Poseidon DT100S-200-160-Ku-Reel

High pressure cleaner POSEIDON on Skid frame (Kubota 100hp, pump UDOR (Italy), hydraulic drive hose reel, 19mm х 90m HP hose, 2 pipe cleaning nozzles, 1,000-litre water tank)

Working weight, kg

920.0

Contracted price

,
,

Brends

All brends

FEEDBACK FORM

SEND

Consultation

Enter your phone or email and we'll contact you!
Receive consultation

Send order

Enter your phone or email and we'll contact you!
SEND
Your request is sent successfully. We'll contact You soon.