Email us Сallback
Manufacturer of high-pressure jetting units "POSEIDON".
The equipment for repair, inspection, cleaning and installation of pipelines.
8-800-555-79-97
Сallback

Sewer Flushers for Mounting of Poseidon B24S series, 100-360 bar, 23/24/27 hp, 21–75 l/min

Sewer Flushers for Mounting of Poseidon B24S series,  100-360 bar, 23/24/27 hp, 21–75 l/min
Sewer Flushers for Mounting of Poseidon B24S series,  100-360 bar, 23/24/27 hp, 21–75 l/min

Manufacturer: Z-Techno (Russia)

Application:

Poseidon waterjet equipment is a state-of-art and affordable solution of for a number of cleaning tasks. Due to the use of innovative Warthog slow rotating nozzles, you are able to clean even the most heavily contaminated sewers.

Wide scope of application in all areas of industry, agriculture, housing and utilities, construction, and car servicing:

  • Waterjet flushing and cleaning of sewers and other pipes
  • Washing and waterjet cleaning of all types of surfaces, including surface preparation for coating application
  • Car washing (carriages, light- and heavy-duty vehicles, agriculture and construction machinery)
  • Cleaning and sanitization of floors, surfaces and equipment in food manufacturing enterprises (meat, dairy, pastry plants)
  • Washing surfaces in livestock farms, poultry yards, pig farms
  • Cleaning garbage chutes in buildings
  • Washing and removal of plasterwork and painting from building face, rehabilitation of facing slabs
  • Wash works at construction sites, cleaning of construction framework
  • Cleaning roads, bridges, tunnels, old coating, insulation and congealed concrete solution
  • Removal of tree bark
  • Washing floors and outdoor areas
  • Washing tanks and vessels

Contracted price In stock

Delivery worldwide.
Add to basket
Consultation
Send order

Technical details:

Water supplyTechnical water, 60°С Max. (Max. 45°С recommended) *
Pump options, bar@l/min100 bar 75 l/min120 bar 70 l/min150 bar 50 l/min200 bar 45 l/min1250 bar 30 l/min275 bar 26 l/min300 bar 25 l/min360 bar 21 l/min
Pressure adjustmentAvailable, fine (adjustment valve, By-pass system)
High-pressure pumpThree-plunger, crank-and-rod, with stoneware plungers (Italy)
High-pressure pump protectionOverheat protector, dry running protection
Type of high-pressure pump driveBelt or gearbox drive (depending on design).
Engine2-cylinder 4-stroke petrol engine with electric starter Briggs & Stratton (Japan)
  • Power – 23 hp (17 kW)
  • Fitted with oil pressure drop protection
  • Fuel consumption – 5.5 l/h
2-cylinder 4-stroke petrol engine with electric starter Honda GX690
  • Power - 24 hp (18 kW)
  • Fitted with oil pressure drop protection
  • Fuel consumption – 6.7 l/h
2-cylinder 4-stroke petrol engine with electric starter Lifan
  • Power - 27 hp (20 kW)
  • Fitted with oil pressure drop protection
  • Fuel consumption – 5.5 l/h
Fuel tank24 liters
Climatic designFilling pump and high-pressure main line with coolant to keep the equipment from freezing
High-pressure hose90 meters long, DN 12.7 mm
Reel for high-pressure hoseWith blind sides, 6-position fixator, manual drive. Reel material – steel with two-component coating. Fitted with hose chain. Upon request, 4-edge roller guide for hose can be installed (option С2). Upon request, reel can come with electric drive with variable rate of rotation (option Electric).
Reel designOn flap with 900-990 mm range (depending on modification), fitted with a handy position sending mechanism on the basis of G-clamp that can be firmly fastened in any position (allows working in a range from 0 to 120°). The G-clamp jams a steel guide and resists high moments of force (up to 1.000 Nm). Upon request, reel can be set in a fixed position (option FIX).
Water tank and system of filling and drainage1,000-litre capacity, emptying sensor automatically shutting engine off. Tank filling system with bayonet inlet on working side, mud filter and float valve to automatically control filling level. System of drainage to the working side.
Suction hose50 meters long, DN 19 mm (option FR)
Reel for suction hoseStationary, manual, a max. of 50-meter hose, DN 19 mm (option FR)
DesignMounting frame, with power unit on shock mounts
Water heating Diesel boiler, 130 kW, 110.000 kcal/h (option Th130)
Nozzles ("Reel" delivery set)2 enhanced (ZET) nozzles made of 40X13 surgical steel  with rear jet outlet angle of 30° (optimal angle) and optional forward jet
Weight208 kg (without water tank), 213 kg (option Electric, without water tank)
Power unit dimensions, WхDхH1280х718х1240 mm (standard configuration), 905х690х1120 mm (“Mini” configuration), 1000х843х1135 mm (gear box-mounted configuration)
Warranties2 years for models with Honda and Briggs & Stratton engines, 1 year – with Lifan engines
*- can be used with water heating module, for hot water wash.

Description:

Authorization from pump manufacturer

Annovi Reverberi (Italy)

Interpump (Italy)

UDOR (Italy)

Features:

  • Upon request, standard and rotating nozzles with the number and location of orifices predetermined
  • Standard delivery set comes wth reel (90-m hose).
  • Standard delivery set comes high-pressure hose 90 meters long.
  • Special high-pressure hoses with DN 12 mm allow for using longer hoses without risking substantive pressure drop.
  • Shut off gauges activated when there is no water or fuel in water tank or engine

Recommended Accessories:


Protective housing for high-pressure hoses
Prevents a high-pressure hose from damages and premature wearing where it enters into a pipe(the housing is set at the site of interface between the shaft walls and the pipe to be flushed).Brightly colored, fitted with fastener.

Grenade/Bomb tip

Excellent thrust features due to a lesser angle of outlet waterjet, which provides for high movement speed.

Application: removal of loose stony deposits, gravel and soft deposits, preparation before using special nozzles, flushing pipes laid down from building to a main pipeline


Chisel tip

Waterjets shooting forward wash off soft deposits, while the arrow-headed tip is best suited for breaking through harder deposits clogging the pipe being cleaned. And rearward waterjet provides for drag force and cleaning of the pipe.

Application: freeing pipes from intertwined roots, opening frozen pipelines, flushing pipes laid down from buildings to main pipeline


Fluke bottom tip

Due to heavy weight and availability of backside nozzles the Fluke tip allows for effective washing depositions from the pipe bottom.

Application: removing such depositions as sand, pebbles, stones, wastewater mud


Aquadrill tip with rotating forward shooting waterjet

The tip utilizes a rotating front nozzle with powerful destructive force, which is best suited for removal of blind blockages, fully clogged pipes.

Application: removal of blind blockages


StoneAge Warthog slowly rotating nozzles (USA)

Through slow rotation and absence of leaks water creates a local area of high pressure on the surface of deposit, penetrates it and disrupts its structure from inside.

Application: for removal of emergency blockages, fats, roots, being a universal tool.

Video

Basic configurations

Poseidon B24S-150-50-Br-Reel

Poseidon high-pressure equipment for mounting on vehicle (Briggs&Stratton 23 hp, pump (ITALY) 150 bar, 50 l/min, turning reel, hose DN 12mm х 90m, 2 pipe cleaning nozzles (ZET), tank 1,000 l)

Gross weight, kg

304

Contracted price

Technical details:

Water supplyTechnical water, 60°С Max. (Max. 45°С recommended) *
Pump options, bar@l/min100 bar 75 l/min120 bar 70 l/min150 bar 50 l/min200 bar 45 l/min1250 bar 30 l/min275 bar 26 l/min300 bar 25 l/min360 bar 21 l/min
Pressure adjustmentAvailable, fine (adjustment valve, By-pass system)
High-pressure pumpThree-plunger, crank-and-rod, with stoneware plungers (Italy)
High-pressure pump protectionOverheat protector, dry running protection
Type of high-pressure pump driveBelt or gearbox drive (depending on design).
Engine2-cylinder 4-stroke petrol engine with electric starter Briggs & Stratton (Japan)
  • Power – 23 hp (17 kW)
  • Fitted with oil pressure drop protection
  • Fuel consumption – 5.5 l/h
2-cylinder 4-stroke petrol engine with electric starter Honda GX690
  • Power - 24 hp (18 kW)
  • Fitted with oil pressure drop protection
  • Fuel consumption – 6.7 l/h
2-cylinder 4-stroke petrol engine with electric starter Lifan
  • Power - 27 hp (20 kW)
  • Fitted with oil pressure drop protection
  • Fuel consumption – 5.5 l/h
Fuel tank24 liters
Climatic designFilling pump and high-pressure main line with coolant to keep the equipment from freezing
High-pressure hose90 meters long, DN 12.7 mm
Reel for high-pressure hoseWith blind sides, 6-position fixator, manual drive. Reel material – steel with two-component coating. Fitted with hose chain. Upon request, 4-edge roller guide for hose can be installed (option С2). Upon request, reel can come with electric drive with variable rate of rotation (option Electric).
Reel designOn flap with 900-990 mm range (depending on modification), fitted with a handy position sending mechanism on the basis of G-clamp that can be firmly fastened in any position (allows working in a range from 0 to 120°). The G-clamp jams a steel guide and resists high moments of force (up to 1.000 Nm). Upon request, reel can be set in a fixed position (option FIX).
Water tank and system of filling and drainage1,000-litre capacity, emptying sensor automatically shutting engine off. Tank filling system with bayonet inlet on working side, mud filter and float valve to automatically control filling level. System of drainage to the working side.
Suction hose50 meters long, DN 19 mm (option FR)
Reel for suction hoseStationary, manual, a max. of 50-meter hose, DN 19 mm (option FR)
DesignMounting frame, with power unit on shock mounts
Water heating Diesel boiler, 130 kW, 110.000 kcal/h (option Th130)
Nozzles ("Reel" delivery set)2 enhanced (ZET) nozzles made of 40X13 surgical steel  with rear jet outlet angle of 30° (optimal angle) and optional forward jet
Weight208 kg (without water tank), 213 kg (option Electric, without water tank)
Power unit dimensions, WхDхH1280х718х1240 mm (standard configuration), 905х690х1120 mm (“Mini” configuration), 1000х843х1135 mm (gear box-mounted configuration)
Warranties2 years for models with Honda and Briggs & Stratton engines, 1 year – with Lifan engines
*- can be used with water heating module, for hot water wash.

Poseidon B24S-150-50-Br-Reel

Poseidon high-pressure equipment for mounting on vehicle (Briggs&Stratton 23 hp, pump (ITALY) 150 bar, 50 l/min, turning reel, hose DN 12mm х 90m, 2 pipe cleaning nozzles (ZET), tank 1,000 l)

Gross weight, kg

304

Contracted price

Brends

All brends

FEEDBACK FORM

SEND

Consultation

Enter your phone or email and we'll contact you!
Receive consultation

Send order

Enter your phone or email and we'll contact you!
SEND
Your request is sent successfully. We'll contact You soon.