Series of Poseidon DT100S apparatus, 96 hp, 180-250 bar, 130-200 l/min

Manufacturer: ZET-TECHNO (Russia)

Application:

Poseidon waterjet equipment is an available and modern solution of cleaning tasks. Due to the use of breakthrough Warthog slow rotation nozzles, the waterjet equipment is capable of cleaning the most heavily contaminated sewers.

Wide scope of application in all sectors of industry, agriculture, housing and utilities, construction and car service:

Hydrodynamic flushing and cleaning of sewers and other pipes
Washing and waterjet cleaning of any surfaces, including their preparation for coating
Washing vehicles (train cars, light vehicles and trucks, agriculture and construction machinery and self-propelled vehicles)
Cleaning and disinfection of floors, surfaces and equipment at food industry enterprises (meat plants, dairy factories, confectionery industry)
Washing of surfaces at livestock farms, poultry houses, pig farms
Cleaning of garbage chutes in buildings
Washing and removal of stucco, paint from building facades, recovery of facing slabs
Washing works at construction sites, cleaning of construction framework
Cleaning of roads, bridges, tunnels from contaminations, old coatings, insulation and congealed cement solution
Removal of bark from lumber
Washing of floors and outdoor sites
Washing of tanks and vessels

Price: руб. In stock

Delivery worldwide.

Add to basket

Consultation

Send order

Technical details:

Water supply	Technical water, max. 60°С (recomended - max. 45°С)
Apparatus parameters, bar@l/min (МPa@m3/h)	180 bar 200 l/min(18 МPa 12 m3/h)	200 bar 160 l/min(20 МPa 9.6 m3/h)	250 bar 130 l/min(25 МPa 7.8 m3/h)
High pressure hose	90 meters long DN 25 mm	90 meters long DN 19 mm
Pressure adjustment	Available, fine (adjusting valve, By-pass system)
High pressure pump	Three ceramic plungers, crank-and-rod (Italy), with nickel-plated water end.
HP pump speed	1000 rpm (reduced speed increases the life of the pump and is necessary to power the pump by gravity from the water tank)
High pressure pump protection	Pump dry run protection
HP pump drive type	Belt-type
Engine	4-cylinder diesel engine with water cooling and turbocompressor Kubota (Japan). Power – 96 hp (71 kW). Fitted with oil pressure drop protection. Fuel consumption - 17.0 l/h.
Fuel tank	Metal, volume of 35 litres. Equipped with an oil level indicator on the control panel that allows monitoring oil level in the tank thus avoiding emergency engine shutdown.
Engine cooling and water heating	Water heat exchanger (without radiator) utilizing the heat generated by an engine for heating of water, which enhances the apparatus performance, especially in cold weather.
Climatic design	System of filling pump and HP main line with antifreeze to protect against freezing in cold weather
Reel for HP hose	With direct drive (without a chain), which provides superior reliability and tremendous power characteristics. Traction force – 250 kgf. Reinforced reel with one-piece sidewalls, hydraulic drive and fine rotation speed adjustment. Hydraulic brake. Reel material – steel, powder coating. Equipped with automatic hose chain Upon request, design with reel electrodrive with variable rotation speed (Electric option)
Water tank and tank filling and drainage system	1,000-litre tank, with a drain gauge that automatically shuts down the engine. The tank filling system with a bayonet-type inlet located on the operator side. Water drain from tank to operating side.
Suction hose	Max. 50 meters long, DN19 mm (FR option)
Reel for suction hose	Stationary, hand-driven, accommodates hose up to 50 meters long and DN 19 mm (FR option)
Design	Vehicle-mounted frame. Power unit on shock mounts.
Water heating	Diesel boiler, 130 kW, 110,000 kcal/h (Th130 option)
Nozzles are included (in "Reel" delivery set	Two enhanced ZET-TECHNO nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚ (optimal angle for this flow), with or no front jet
Warranty	Warranty for engine – 5 years, for apparatus – 2 years

Description:

Features:

Authorization from pump manufacturer
UDOR (Italy)

Noiseless operation due to the possibility of assembling the apparatus in an isothermal and soundproof van (no need to start the basic chassis engine).
Independent engine that allows reaching high parameters of pressure and flow without loading the car engine.
Plunger high-pressure pump with low frequency of crank shaft rotation (has a longer life).
System of utilization of heat produced by the engine allows heating water, which expands geographic application and requires less time for cleaning actions.
Standard delivery set includes a reel on hydraulic revolution door leaf, with hydraulic fixation in any working position, hydraulic drive and rotation speed control.
Installation of extra tanks of any volumes (depends on your chassis load capacity).

Recommended accessories:

	Top guising roller Protects a high-pressure sleeve from damages and premature wear at the time it enters a sewage well or drain shaft (to be installed on the top edge of the pit cover)
	Protective sleeve for HP hose Protects HP sleeve from damages and premature wear at the time it enters a pipe (it is set in the place where well walls mate the pipe being cleaned). It has a bright color and is fitted with clamping device.
	Grenade tip/Bomb Outstanding clog busting characteristics due to the smaller slant angle of output water jet, which ensures high output speed. Application: removal of loose stony deposits, gravel, and soft deposits, preparation before use of special nozzles, flushing of pipes coming from structures to a main pipeline.
	Chisel tip Forward jets wash out softer deposits; wedge-shaped design improves its penetration performance and allows for a more efficient removal of clogging; rear water jet provides for thrust and pipe flushing. Application: cleaning of pipes from intertwined roots, freeing of frozen pipelines from buildings to a main pipeline.
	Fluke bottom tip Its heaviness and rear-located nozzles allow efficiently washing out debris from the pipe bottom. Application: for cleaning of sand, pebble, stone and sludge deposits
	Aquadrill tip with forward rotary jet The tip features a powerful rotating front nozzle, which is especially effective when removing blockages and cleaning of fully clogged pipes. Application: removal of heavy clogging (blockages)
	StoneAge Warthog slow rotation rotary tip (USA). Due to slow rotation and leakproofness, water creates a local region of high pressure on the surface of deposit and by penetrating inside tears apart the contamination structure from inside Application: for elimination of emergency blockages

Video

,
,

Basic configurations

Poseidon DT100S-200-160-Ku-Reel

High pressure cleaner POSEIDON on Skid frame (Kubota 100hp, pump UDOR (Italy), hydraulic drive hose reel, 19mm х 90m HP hose, 2 pipe cleaning nozzles, 1,000-litre water tank)

Working weight, kg

920.0

Contracted price

Add to basket

Technical details:

Water supply	Technical water, max. 60°С (recomended - max. 45°С)
Apparatus parameters, bar@l/min (МPa@m3/h)	180 bar 200 l/min(18 МPa 12 m3/h)	200 bar 160 l/min(20 МPa 9.6 m3/h)	250 bar 130 l/min(25 МPa 7.8 m3/h)
High pressure hose	90 meters long DN 25 mm	90 meters long DN 19 mm
Pressure adjustment	Available, fine (adjusting valve, By-pass system)
High pressure pump	Three ceramic plungers, crank-and-rod (Italy), with nickel-plated water end.
HP pump speed	1000 rpm (reduced speed increases the life of the pump and is necessary to power the pump by gravity from the water tank)
High pressure pump protection	Pump dry run protection
HP pump drive type	Belt-type
Engine	4-cylinder diesel engine with water cooling and turbocompressor Kubota (Japan). Power – 96 hp (71 kW). Fitted with oil pressure drop protection. Fuel consumption - 17.0 l/h.
Fuel tank	Metal, volume of 35 litres. Equipped with an oil level indicator on the control panel that allows monitoring oil level in the tank thus avoiding emergency engine shutdown.
Engine cooling and water heating	Water heat exchanger (without radiator) utilizing the heat generated by an engine for heating of water, which enhances the apparatus performance, especially in cold weather.
Climatic design	System of filling pump and HP main line with antifreeze to protect against freezing in cold weather
Reel for HP hose	With direct drive (without a chain), which provides superior reliability and tremendous power characteristics. Traction force – 250 kgf. Reinforced reel with one-piece sidewalls, hydraulic drive and fine rotation speed adjustment. Hydraulic brake. Reel material – steel, powder coating. Equipped with automatic hose chain Upon request, design with reel electrodrive with variable rotation speed (Electric option)
Water tank and tank filling and drainage system	1,000-litre tank, with a drain gauge that automatically shuts down the engine. The tank filling system with a bayonet-type inlet located on the operator side. Water drain from tank to operating side.
Suction hose	Max. 50 meters long, DN19 mm (FR option)
Reel for suction hose	Stationary, hand-driven, accommodates hose up to 50 meters long and DN 19 mm (FR option)
Design	Vehicle-mounted frame. Power unit on shock mounts.
Water heating	Diesel boiler, 130 kW, 110,000 kcal/h (Th130 option)
Nozzles are included (in "Reel" delivery set	Two enhanced ZET-TECHNO nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚ (optimal angle for this flow), with or no front jet
Warranty	Warranty for engine – 5 years, for apparatus – 2 years

Poseidon DT100S-200-160-Ku-Reel

High pressure cleaner POSEIDON on Skid frame (Kubota 100hp, pump UDOR (Italy), hydraulic drive hose reel, 19mm х 90m HP hose, 2 pipe cleaning nozzles, 1,000-litre water tank)

Working weight, kg

920.0

Contracted price

Add to basket

,
,