Series of Poseidon B24S-Largus apparatus, 100–360 bar, 23/24/27 hp, 21–75 l/min
Manufacturer:ZET-TECHNO (Russia)
Application:
Poseidon waterjet equipment is a state-of-art and affordable solution of for a number of cleaning tasks. Due to the use of innovative Warthog slow rotating nozzles, you are able to clean even the most heavily contaminated sewers.
Wide scope of application in all areas of industry, agriculture, housing and utilities, construction, and car servicing:
Waterjet flushing and cleaning of sewers and other pipes
Washing and waterjet cleaning of all types of surfaces, including surface preparation for coating application
Car washing (carriages, light- and heavy-duty vehicles, agriculture and construction machinery)
Cleaning and sanitization of floors, surfaces and equipment in food manufacturing enterprises (meat, dairy, pastry plants)
Washing surfaces in livestock farms, poultry yards, pig farms
Cleaning garbage chutes in buildings
Washing and removal of plasterwork and painting from building face, rehabilitation of facing slabs
Wash works at construction sites, cleaning of construction framework
Cleaning roads, bridges, tunnels, old coating, insulation and congealed concrete solution
1450 rpm
(reduced speed increases the life of the pump and is necessary to power the pump by gravity from the water tank)
HP pump protection
Overheat thermal sensor, pump dry run protection
HP pump drive type
Through a reduction gear
Engine
Two-cylinder 4-stroke gasoline engine Briggs&Stratton with electric starter (Japan).
Power- 23 hp (17 kW).
Fitted with oil pressure drop protection.
Fuel consumption - 5.5 l/h.
Two-cylinder 4-stroke gasoline engine Honda GX690 with electric starter.
Power - 24 hp (18 kW).
Fitted with oil pressure drop protection.
Fuel consumption - 6.7 l/h.
Fuel tank
24 l
Climatic design
System of filling pump and HP main line with antifreeze to protect against freezing
Reel for HP hose
With one-piece sidewalls, 6-position lock, hand-driven. Reel material – steel with 2-component coating.
Reel design
On a flap door with outreach length of 1000 mm (depending on modification) fitted with a handy positioning mechanism made on the basis of an adjustable clamp, with rigid fixation in any working position (allows working within a range from 0 to 120 degrees), holding down a steel guide and withstanding torques of up to 1,000 Nm.
Water tank and tank filling and drainage system
500-litre tank, with a drain sensor that automatically shuts down the engine. The tank filling system with a bayonet-type inlet located on the operator side. The system of water drain from the tank to the operator side.
Design
Mounting frame, power unit on shock mounts
Nozzles are included (in "Reel" delivery set)
Two enhanced ZET-TECHNO nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚(optimal angle for this flow), with or no front jet
Weight
215 kg (without water tank)
Power unit dimensions, WхDхH
1110x815x933 mm (power block)
1250x810x980 (water tanks 500 l on a stand)
Warranty
2 years. For Honda, Briggs&Stratton engines – 3 years
* - can be used together with water boiler module, for washing with hot water. 1 - these pump parameters are only valid for a modification featuring Lifan engine. Parameters for Briggs and Honda are specified in the appropriate versions.
Upon request, standard and rotary nozzles with a preset location and number of holes.
Standard delivery set includes a reel for 90-meter hose.
Standard delivery set includes 90-meter high-pressure hose.
Special high-pressure hoses have a nominal bore of 12 mm, which allows for use of longer hoses without any substantial pressure decrease.
Appealing price and excellent performance.
Shutdown transducers when the apparatus is out of water in the tank or oil in the engine.
The Briggs&Stratton company is the largest and well known around the globe manufacturer of small-power internal combustion engines. In 2012, the company produced over 20,000,000 engines, which is 5,000,000 pieces more than an output of the Honda company.
The most reliable engines produced by the Briggs&Stratton are those of Vanguard series that are being produced in Japan. Besides, the company owns the largest network of certified engine service centers in Russia and all over the world.
Recommended accessories:
Protective sleeve for HP hose Protects HP sleeve from damages and premature wear at the time it enters a pipe (it is set in the place where well walls mate the pipe being cleaned). It has a bright color and is fitted with clamping device.
Grenade tip/Bomb
Outstanding punching properties due to the smaller slant angle of output water jet, which ensures high output speed.
Application: removal of loose stony deposits, gravel, and soft deposits, preparation before use of special nozzles, flushing of pipes coming from structures to a main pipeline.
Chisel tip
Forward jets wash out softer deposits; arrow-headed design contributes to its penetration performance and allows for a more efficient removal of clogging; rear water jet allows for thrust and pipe flushing.
Application: cleaning of pipes from intertwined roots, freeing of frozen pipelines from buildings to a main pipeline.
Fluke bottom tip
Its heaviness and rear-located nozzles allow efficiently washing out contaminations from the pipe bottom.
Application: for cleaning of sand, pebble, stone and sludge deposits
Aquadrill tip with rotary forward water jet
The tip features a powerful rotating front nozzle, which is especially effective when removing blockages and cleaning of fully clogged pipes.
Application: removal of heavy contaminations
StoneAge Warthog slow rotation rotary tip (USA).
Due to slow rotation and leakproofness, water creates a local region of high pressure on the surface of deposit and by penetrating inside tears aparts the contamination structure from inside
Application: for elimination of emergency blockages, removal
Video
Basic configurations
Poseidon B24S-150-50-Br-Reel-500-Largus
High pressure cleaner POSEIDON for installation in the vehicle (Briggs&Stratton(Japan) 23hp, pump Annovi Reverberi (Italy), swivel hose reel, 12mm х 90m HP hose, 2 pipe cleaning nozzles, 500-litre water tank)
1450 rpm
(reduced speed increases the life of the pump and is necessary to power the pump by gravity from the water tank)
HP pump protection
Overheat thermal sensor, pump dry run protection
HP pump drive type
Through a reduction gear
Engine
Two-cylinder 4-stroke gasoline engine Briggs&Stratton with electric starter (Japan).
Power- 23 hp (17 kW).
Fitted with oil pressure drop protection.
Fuel consumption - 5.5 l/h.
Two-cylinder 4-stroke gasoline engine Honda GX690 with electric starter.
Power - 24 hp (18 kW).
Fitted with oil pressure drop protection.
Fuel consumption - 6.7 l/h.
Fuel tank
24 l
Climatic design
System of filling pump and HP main line with antifreeze to protect against freezing
Reel for HP hose
With one-piece sidewalls, 6-position lock, hand-driven. Reel material – steel with 2-component coating.
Reel design
On a flap door with outreach length of 1000 mm (depending on modification) fitted with a handy positioning mechanism made on the basis of an adjustable clamp, with rigid fixation in any working position (allows working within a range from 0 to 120 degrees), holding down a steel guide and withstanding torques of up to 1,000 Nm.
Water tank and tank filling and drainage system
500-litre tank, with a drain sensor that automatically shuts down the engine. The tank filling system with a bayonet-type inlet located on the operator side. The system of water drain from the tank to the operator side.
Design
Mounting frame, power unit on shock mounts
Nozzles are included (in "Reel" delivery set)
Two enhanced ZET-TECHNO nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚(optimal angle for this flow), with or no front jet
Weight
215 kg (without water tank)
Power unit dimensions, WхDхH
1110x815x933 mm (power block)
1250x810x980 (water tanks 500 l on a stand)
Warranty
2 years. For Honda, Briggs&Stratton engines – 3 years
* - can be used together with water boiler module, for washing with hot water. 1 - these pump parameters are only valid for a modification featuring Lifan engine. Parameters for Briggs and Honda are specified in the appropriate versions.
Poseidon B24S-150-50-Br-Reel-500-Largus
High pressure cleaner POSEIDON for installation in the vehicle (Briggs&Stratton(Japan) 23hp, pump Annovi Reverberi (Italy), swivel hose reel, 12mm х 90m HP hose, 2 pipe cleaning nozzles, 500-litre water tank)