Email us Сallback
Manufacturer of high-pressure jetting units "POSEIDON".
The equipment for repair, inspection, cleaning and installation of pipelines.
8-800-555-79-97
Сallback

Sewer Flushers for Mounting of Poseidon D58S series, 200 bar, 100 l/min

Manufacturer: ZET-TECHNO (Russia)

Application:

Poseidon waterjet equipment is an available and modern solution of cleaning tasks. Due to the use of breakthrough Warthog slow rotation nozzles, the waterjet equipment is capable of cleaning the most heavily contaminated sewers.

Wide scope of application in all sectors of industry, agriculture, housing and utilities, construction and car service:

  • Hydrodynamic flushing and cleaning of sewers and other pipes
  • Washing and waterjet cleaning of any surfaces, including their preparation for coating
  • Washing vehicles (train cars, light vehicles and trucks, agriculture and construction machinery and self-propelled vehicles)
  • Cleaning and disinfection of floors, surfaces and equipment at food industry enterprises (meat plants, dairy factories, confectionery industry)
  • Washing of surfaces at livestock farms, poultry houses, pig farms
  • Cleaning of garbage chutes in buildings
  • Washing and removal of stucco, paint from building facades, recovery of facing slabs
  • Washing works at construction sites, cleaning of construction framework
  • Cleaning of roads, bridges, tunnels from contaminations, old coatings, insulation and congealed cement solution
  • Removal of bark from lumber
  • Washing of floors and outdoor sites
  • Washing of tanks and vessels

Price: руб. In stock

Delivery worldwide.
Add to basket
Consultation
Send order

Technical details:

Water supplyTechnical water, 60°С Max. (Max. 45°С recommended) *
Pump options, bar@l/min200 bar 100 l/min
High-pressure hose90 meters long, DN 19 mm
Pressure adjustmentAvailable, fine (adjustment valve, By-pass system)
High-pressure pumpThree-plunger, crank-and-rod, with stoneware plungers (Italy)
HP pump speed1000 rpm (reduced speed increases the life of the pump and is necessary to power the pump by gravity from the water tank)
High-pressure pump protectionDry running protection
Type of high-pressure pump driveBelt drive with guard
Engine4-cylinder diesel engine (China) with water cooling. Power - 58 hp (42.66 kW). Equipped with oil pressure drop protection. Fuel consumption - 14.1 l / h. Equipped with: Oil pressure drop protection. Engine speed indication Oil and coolant temperature indication Battery charge indication and hour meter
Fuel tankMetal, capacity 35 liters. Equipped with a fuel level sensor with a pointer on the control panel. Allows you to quickly monitor the level of fuel in the tank and avoid a sudden shutdown of the engine.
Engine cooling and water heatingWater heat exchanger (without radiator) utilizing the heat generated by an engine for heating of water, which enhances the apparatus performance, especially in cold weather.
Climatic designFilling pump and high-pressure main line with coolant to keep the equipment from freezing (option)
Reel for high-pressure hoseWith direct drive (without a chain), which provides superior reliability and tremendous power characteristics. Traction force - 250 kgf. Reinforced reel with one-piece sidewalls, hydraulic drive and fine rotation speed adjustment. Hydraulic brake. Reel material - steel, powder coating. Equipped with a hose chain.   Upon request, design with reel electrodrive with variable rotation speed (Electric options).
Reel designOn a revolution door with outreach length of 950 mm, fitted with a handy positioning mechanism made on the basis of an adjustable clamp, with rigid fixation in any working position (allows working within a range from 0 to 120 degrees), holding down a steel guide and withstanding torques of up to 1,000 Nm. Upon request, design featuring a fixed reel position (FIX option).
Water tank and system of filling and drainage1,000-litre capacity, emptying sensor automatically shutting engine off. Tank filling system with bayonet inlet on working side, mud filter and float valve to automatically control filling level. System of drainage to the working side.
Suction hose50 meters long, DN 19 mm (option FR)
Reel for suction hoseStationary, manual, a max. of 50-meter hose, DN 19 mm (option FR)
DesignMounting frame, with power unit on shock mounts
Water heating Diesel boiler, 130 kW, 110.000 kcal/h (option Th130)
Nozzles ("Reel" delivery set)2 enhanced (ZET-TECHNO) nozzles made of 40X13 surgical steel  with rear jet outlet angle of 30° (optimal angle) and optional forward jet
Weight790 kg (without water tank)
Power unit dimensions, WхDхH1450 х 1750 х 1500 mm (standard configuration)
Warranties2 years

Description:

Features:

Authorization from pump manufacturer

UDOR (Italy)

Annovi Reverberi (Italy)

  • Upon request, standard and rotating nozzles with the number and location of orifices predetermined.
  • Standard delivery set comes wth reel (90-m hose).
  • Standard delivery set comes high-pressure hose 90 meters long.
  • Special high-pressure hoses with DN 12 mm allow for using longer hoses without risking substantive pressure drop.
  • Shut off gauges activated when there is no water or fuel in water tank or engine.

 

Recommended accessories:


Top guiding roller
Protects a high-pressure sleeve from damages and premature wear at the time it enters a sewage well or drain shaft (to be installed on the top edge of the pit cover)

Protective sleeve for HP hose
Protects HP sleeve from damages and premature wear at the time it enters a pipe (it is set in the place where well walls mate the pipe being cleaned). It has a bright color and is fitted with clamping device.

Grenade tip/Bomb

Outstanding clog busting characteristics due to the smaller slant angle of output water jet, which ensures high output speed.

Application: removal of loose stony deposits, gravel, and soft deposits, preparation before use of special nozzles, flushing of pipes coming from structures to a main pipeline.


Chisel tip

Forward jets wash out softer deposits; wedge-shaped design improves its penetration performance and allows for a more efficient removal of clogging; rear water jet provides for thrust and pipe flushing.

Application: cleaning of pipes from intertwined roots, freeing of frozen pipelines from buildings to a main pipeline.


Fluke bottom tip

Its heaviness and rear-located nozzles allow efficiently washing out debris from the pipe bottom.

Application: for cleaning of sand, pebble, stone and sludge deposits


Aquadrill tip with forward rotary jet

The tip features a powerful rotating front nozzle, which is especially effective when removing blockages and cleaning of fully clogged pipes.

Application: removal of heavy cloggings (blockages)


StoneAge Warthog slow rotation rotary tip (USA).

Due to slow rotation and leakproofness, water creates a local region of high pressure on the surface of deposit and by penetrating inside tears apart the contamination structure from inside

Application: for elimination of emergency blockages

 

 

 

Video



Basic configurations

Poseidon D58S-200-100-D-Reel-Basе

High pressure cleaner POSEIDON on Skid frame (QUANCHAI 58hp, pump (Italy), water heating by a heat exchanger, rotary drum with hydraulic drive, 16mm х 90m HP hose, 2 pipe cleaning nozzles, without water tank)

Working weight, kg

790

Contracted price

Technical details:

Water supplyTechnical water, 60°С Max. (Max. 45°С recommended) *
Pump options, bar@l/min200 bar 100 l/min
High-pressure hose90 meters long, DN 19 mm
Pressure adjustmentAvailable, fine (adjustment valve, By-pass system)
High-pressure pumpThree-plunger, crank-and-rod, with stoneware plungers (Italy)
HP pump speed1000 rpm (reduced speed increases the life of the pump and is necessary to power the pump by gravity from the water tank)
High-pressure pump protectionDry running protection
Type of high-pressure pump driveBelt drive with guard
Engine4-cylinder diesel engine (China) with water cooling. Power - 58 hp (42.66 kW). Equipped with oil pressure drop protection. Fuel consumption - 14.1 l / h. Equipped with: Oil pressure drop protection. Engine speed indication Oil and coolant temperature indication Battery charge indication and hour meter
Fuel tankMetal, capacity 35 liters. Equipped with a fuel level sensor with a pointer on the control panel. Allows you to quickly monitor the level of fuel in the tank and avoid a sudden shutdown of the engine.
Engine cooling and water heatingWater heat exchanger (without radiator) utilizing the heat generated by an engine for heating of water, which enhances the apparatus performance, especially in cold weather.
Climatic designFilling pump and high-pressure main line with coolant to keep the equipment from freezing (option)
Reel for high-pressure hoseWith direct drive (without a chain), which provides superior reliability and tremendous power characteristics. Traction force - 250 kgf. Reinforced reel with one-piece sidewalls, hydraulic drive and fine rotation speed adjustment. Hydraulic brake. Reel material - steel, powder coating. Equipped with a hose chain.   Upon request, design with reel electrodrive with variable rotation speed (Electric options).
Reel designOn a revolution door with outreach length of 950 mm, fitted with a handy positioning mechanism made on the basis of an adjustable clamp, with rigid fixation in any working position (allows working within a range from 0 to 120 degrees), holding down a steel guide and withstanding torques of up to 1,000 Nm. Upon request, design featuring a fixed reel position (FIX option).
Water tank and system of filling and drainage1,000-litre capacity, emptying sensor automatically shutting engine off. Tank filling system with bayonet inlet on working side, mud filter and float valve to automatically control filling level. System of drainage to the working side.
Suction hose50 meters long, DN 19 mm (option FR)
Reel for suction hoseStationary, manual, a max. of 50-meter hose, DN 19 mm (option FR)
DesignMounting frame, with power unit on shock mounts
Water heating Diesel boiler, 130 kW, 110.000 kcal/h (option Th130)
Nozzles ("Reel" delivery set)2 enhanced (ZET-TECHNO) nozzles made of 40X13 surgical steel  with rear jet outlet angle of 30° (optimal angle) and optional forward jet
Weight790 kg (without water tank)
Power unit dimensions, WхDхH1450 х 1750 х 1500 mm (standard configuration)
Warranties2 years

Poseidon D58S-200-100-D-Reel-Basе

High pressure cleaner POSEIDON on Skid frame (QUANCHAI 58hp, pump (Italy), water heating by a heat exchanger, rotary drum with hydraulic drive, 16mm х 90m HP hose, 2 pipe cleaning nozzles, without water tank)

Working weight, kg

790

Contracted price



Brends

All brends

FEEDBACK FORM

SEND

Consultation

Enter your phone or email and we'll contact you!
Receive consultation

Send order

Enter your phone or email and we'll contact you!
SEND
Your request is sent successfully. We'll contact You soon.