Email us Сallback
Manufacturer of high-pressure jetting units "POSEIDON".
The equipment for repair, inspection, cleaning and installation of pipelines.
8-800-555-79-97
Сallback

Sewer Flushers for Mounting of Poseidon B40S series, 100-320 bar, 35/40 hp, 43–142 l/min

Sewer Flushers for Mounting of Poseidon B40S series,  100-320 bar, 35/40 hp, 43–142 l/min
Sewer Flushers for Mounting of Poseidon B40S series,  100-320 bar, 35/40 hp, 43–142 l/min

Poseidon waterjet equipment is a state-of-art and affordable solution of for a number of cleaning tasks. Due to the use of innovative Warthog slow rotating nozzles, you are able to clean even the most heavily contaminated sewers.

Wide scope of application in all areas of industry, agriculture, housing and utilities, construction, and car servicing:

  • Waterjet flushing and cleaning of sewers and other pipes
  • Washing and waterjet cleaning of all types of surfaces, including surface preparation for coating application
  • Car washing (carriages, light- and heavy-duty vehicles, agriculture and construction machinery)
  • Cleaning and sanitization of floors, surfaces and equipment in food manufacturing enterprises (meat, dairy, pastry plants)
  • Washing surfaces in livestock farms, poultry yards, pig farms
  • Cleaning garbage chutes in buildings
  • Washing and removal of plasterwork and painting from building face, rehabilitation of facing slabs
  • Wash works at construction sites, cleaning of construction framework
  • Cleaning roads, bridges, tunnels, old coating, insulation and congealed concrete solution
  • Removal of tree bark
  • Washing floors and outdoor areas
  • Washing tanks and vessels

Contracted price In stock

Delivery worldwide.
Add to basket
Consultation
Send order

Technical details:

Water supplyIndustrial water, max. temperature 60°С (recommended up to 45°C)
Pump options, bar@lpm  (MPa@m3/h)100 bar  142 l/min 10 MPa 8,5 m3/h120 bar  120 l/min 12 MPa 7,2 m3/h150 bar  90 l/min 15MPa 5,4 m3/h175 bar  80 l/min 17,5MPa 4,8 m3/h200 bar  55 l/min 20MPa 3,3 m3/h200 bar  70 l/min 20MPa 4,2 m3/h250 bar  51 l/min 25MPa 3 m3/h320 bar  43 l/min 32MPa 2,6 m3/h
Pressure regulationManual, by-pass system
High pressure pumpTriplex crank with ceramic plungers (Italy)
Pump protectionPump dry running protection
Type of high pressure pump driveBelt-drive configuration with fencing
Motor2-cylinder air-cooled petrol engine Briggs&Stratton (Japan). Power - 35 hp. (25,7 kW). Equipped with low oil pressure shutdown. Fuel consumption - 8,9 l/h.2-cylinder air-cooled petrol engine KOHLER (Italy). Power - 40 hp (29,4 kW). Equipped with low oil pressure shutdown. Fuel consumption - 10,6 l/h.
Fuel tank24 l
Climatic designFilling pump and high-pressure main line with antifreeze to keep the equipment from freezing
High pressure hose90 meters long, DN16 mm Length: 120 m, ID: 16 mm (option H120)
High pressure hose reelWith blind sides, цith hydraulically driven and smooth speed regulation. Hydraulic brake. Reel material – steel with two-component coating. Fitted with hose chain. Upon request, 4-edge roller guide for hose can be installed (option С2). On request, version with a hand reel (option Manual). Upon request, reel can come with electric drive with variable rate of rotation (option Electric).
Modification of reelOn flap with 1110-1170 mm range (depending on modification), fitted with a handy position sending mechanism on the basis of G-clamp that can be firmly fastened in any position (allows working in a range from 0 to 120°). The G-clamp jams a steel guide and resists high moments of force (up to 1.000 Nm) Upon request, reel can be set in a fixed position (option FIX).
Water tank and system of filling and drainage1,000-litre capacity, emptying sensor automatically shutting engine off. Tank filling system with bayonet inlet on working side. System of drainage to the working side.
Suction hose50 meters long, DN 19 mm (option)
Reel for suction hoseStationary, manual, a max. of 50-meter hose, DN 19 mm (option)
DesignMounting frame, with power unit on shock mounts
Water heatingDiesel boiler, 157 kW, 135.000 kcal/h (option Th)
Nozzles ("Reel" delivery set)2 enhanced (ZET) nozzles made of 40X13 surgical steel with rear jet outlet angle of 30° (optimal angle) and optional forward jet
Weight (Power unit)377 kg (standard configuration, without water tank) 312 kg (with option Manual/Electric, without water tank) 322 kg (with option FIX, without water tank)
Power unit dimensions, WхDхH1300х1240х1050 mm (standard configuration) 1315х1060х1130 mm (with option Manual/Electric) 1270х1290х1280 мм (with option FIX)
Warranty2 years. On engine Briggs&Stratton – 3 years

Description:

The drain cleaning machine allows fully use of power engine Kubota for efficient cleaning of pipes. The machine with innovation nozzles Warthog can be used for cleaning of sewer lines up to 1000 mm.
It is equipped with reliable pump, hydraulic driven high pressure reel with rotation speed control.
The machine is equipped with water tank for total independence from any sources of water supply. Moreover the number of tanks depends only on lift capacity of Your chassis.
This machine also allow to effectively clean any surfaces, including multipost mode.
We do fully installation of the equipment on any chassis the customer – from the trailer to the van.

Features:

  • On request rotary and cleaning nozzles with a specified location and the number of holes.
  • The high pressure hoses with diameters 16 mm allow to use longer hoses without significant pressure drops.
  • Attractive price of machine with excellent performance.
  • Shut off gauges activated when there is no water or fuel in water tank or engineе.
  • On request – installation in a van or trailer. Installation of a special laboratory, technical equipment. Obtaining documents for a specialized vehicle.
  • Installation of additional tanks.

Accessories:

  • Nozzles KEG, StoneAge Warthog of all types.
  • Kit for cleaning surfaces.
  • Additional reels with smaller diameter high pressure hoses for cleaning of small pipelines.
  • Plastic water tanks 200 – 1000l.
  • Lifting pump.
  • Protective clothing.
  • Additional filtration systems.

Warranty:

  • 2 years. On engine Briggs&Stratton – 3 years
  • Warranty and post-warranty service

Basic configurations

DT59S-160-130-Ku-Reel

AVD Poseidon for installation in vehicle (Kubota 59hp,  pump UDOR (Italy) 160bar, 130l/min, hydraulic driven high pressure hose reel, hose 19mm х 90m, 4 cleaning nozzles, tank 1000l)

Working weight, kg

785

Contracted price

Technical details:

Water supplyIndustrial water, max. temperature 60°С (recommended up to 45°C)
Pump options, bar@lpm  (MPa@m3/h)100 bar  142 l/min 10 MPa 8,5 m3/h120 bar  120 l/min 12 MPa 7,2 m3/h150 bar  90 l/min 15MPa 5,4 m3/h175 bar  80 l/min 17,5MPa 4,8 m3/h200 bar  55 l/min 20MPa 3,3 m3/h200 bar  70 l/min 20MPa 4,2 m3/h250 bar  51 l/min 25MPa 3 m3/h320 bar  43 l/min 32MPa 2,6 m3/h
Pressure regulationManual, by-pass system
High pressure pumpTriplex crank with ceramic plungers (Italy)
Pump protectionPump dry running protection
Type of high pressure pump driveBelt-drive configuration with fencing
Motor2-cylinder air-cooled petrol engine Briggs&Stratton (Japan). Power - 35 hp. (25,7 kW). Equipped with low oil pressure shutdown. Fuel consumption - 8,9 l/h.2-cylinder air-cooled petrol engine KOHLER (Italy). Power - 40 hp (29,4 kW). Equipped with low oil pressure shutdown. Fuel consumption - 10,6 l/h.
Fuel tank24 l
Climatic designFilling pump and high-pressure main line with antifreeze to keep the equipment from freezing
High pressure hose90 meters long, DN16 mm Length: 120 m, ID: 16 mm (option H120)
High pressure hose reelWith blind sides, цith hydraulically driven and smooth speed regulation. Hydraulic brake. Reel material – steel with two-component coating. Fitted with hose chain. Upon request, 4-edge roller guide for hose can be installed (option С2). On request, version with a hand reel (option Manual). Upon request, reel can come with electric drive with variable rate of rotation (option Electric).
Modification of reelOn flap with 1110-1170 mm range (depending on modification), fitted with a handy position sending mechanism on the basis of G-clamp that can be firmly fastened in any position (allows working in a range from 0 to 120°). The G-clamp jams a steel guide and resists high moments of force (up to 1.000 Nm) Upon request, reel can be set in a fixed position (option FIX).
Water tank and system of filling and drainage1,000-litre capacity, emptying sensor automatically shutting engine off. Tank filling system with bayonet inlet on working side. System of drainage to the working side.
Suction hose50 meters long, DN 19 mm (option)
Reel for suction hoseStationary, manual, a max. of 50-meter hose, DN 19 mm (option)
DesignMounting frame, with power unit on shock mounts
Water heatingDiesel boiler, 157 kW, 135.000 kcal/h (option Th)
Nozzles ("Reel" delivery set)2 enhanced (ZET) nozzles made of 40X13 surgical steel with rear jet outlet angle of 30° (optimal angle) and optional forward jet
Weight (Power unit)377 kg (standard configuration, without water tank) 312 kg (with option Manual/Electric, without water tank) 322 kg (with option FIX, without water tank)
Power unit dimensions, WхDхH1300х1240х1050 mm (standard configuration) 1315х1060х1130 mm (with option Manual/Electric) 1270х1290х1280 мм (with option FIX)
Warranty2 years. On engine Briggs&Stratton – 3 years

DT59S-160-130-Ku-Reel

AVD Poseidon for installation in vehicle (Kubota 59hp,  pump UDOR (Italy) 160bar, 130l/min, hydraulic driven high pressure hose reel, hose 19mm х 90m, 4 cleaning nozzles, tank 1000l)

Working weight, kg

785

Contracted price

Brends

All brends

FEEDBACK FORM

SEND

Consultation

Enter your phone or email and we'll contact you!
Receive consultation

Send order

Enter your phone or email and we'll contact you!
SEND
Your request is sent successfully. We'll contact You soon.