Email us Сallback
Manufacturer of high-pressure jetting units "POSEIDON".
The equipment for repair, inspection, cleaning and installation of pipelines.
8-800-555-79-97
Сallback

Frame-mounted series of high pressure equipment "Poseidon", 125 hp

Poseidon DT125 apparatus series, 125 hp, 1,032-2,800 bar, 15-38 l/min

Manufacturer: Z-Techno (Russia)

Application:

Wide scope of application in heavy industry, agriculture, housing and utilities sector, and construction:

  • Hydrodynamic removal of solid residues from pipes
  • Cleaning of tubings
  • Cleaning of any kinds of surfaces including preparation of surfaces for applying of coatings without use of abrasive materials
  • Cleaning of boilers, heat exchangers, vaporizers and other equipment from residues and scales
  • Washing at construction sites, cleaning of construction framework, removal of concrete from mixers
  • Renovation of concrete structures, scarification of concrete edifices, pointing of concrete joints, preparation of structures for anti-corrosive works, removal of plasterwork and painting
  • Cleaning of roads, bridges, tunnels, old coatings, insulation and congealed concrete solutions
  • Cleaning of airfield take-off runways
  • Removal of corrosion and painting traces from metal works, cutting of metal
  • Cleaning of tanks and vessels
  • Washing and cleaning of ships in dockage facilities

Contracted price In stock

Delivery worldwide.
Add to basket
Consultation
Send order

Technical details:

Water supplyTechnical water, 60 °С max. (45°С max. is recommended)
Pump options, bar@l/min 1,032 bar 38 l/min1,400 bar 29 l/min2,800 bar 15 l/min
Pressure adjustmentBy means of jet caliber (standard) or high pressure regulator (optional)
High pressure pump Horizontal, crank-and-rod, with stainless steel unit and integrated plunger cooling system, T-300 Gardner Denver* (the USA)
High pressure pump protectionFrame-mounted booster pump (optional), pump dry running protection, high pressure safety valve with rupture disc
Type of high pressure pump drive Belt-drive configuration with fencing
Motor

Diesel motor with water cooling Perkins 11044D-E44TA featuring user-friendly control console, electrostarter and increased capacity battery.

  • Power – 125 hp (93 kW).
  • Fitted with protection against low oil pressure.
Fuel tank100 l
Water tanks100-litre surge tank made from aluminum or stainless steel fitted with filling control valve and drainage gauge, access door for cleaning. At request, an aggregate is completed with 300 – 3,000 litre water tanks, as per installation conditions.
DesignStandard or extended frame, mounting on dolly, trailer, chassis, container, heated container
Weight1,634 kg
Dimensions2,642х1,524х1,803 mm
WarrantyBasic warranty – 1 year, extended warranty – 2 years

Description:

High pressure equipment “Poseidon” is a powerful solution for industrial cleaning of pipes and surfaces. Compact and user-friendly design, solid frame, components from Italy, Germany, and the USA make the equipment “Poseidon” universal and reliable apparatus for operation in all fields of industry.
For usage in scarce water conditions the equipment is completed with water tanks of any capacity and booster pump.
We perform turnkey installation on any chassis requested by a customer – ranging from trailer to van, special vehicles not being an exception.
Upon your request we are ready to design and manufacture custom-tailored solutions. For instance, system of automatic cleaning of pipes in a machinery shop (for tubings and other pipes to be renovated), system of cleaning mixers from concrete, etc.

Features:

  • Low rotation three-plunger pump of industrial type (long service life).
  • Sturdy frame with orifices for a forklift forks.
  • Stainless steel filter with cartridges (for 20 microns).

Насос T-300M/H/UH
T-300 pump consists of two main parts: power unit and hydraulic one. The power unit comprises crankshaft, rods and pistons; it is intended to convert revolving motion from the motor to reciprocating motion of plungers. T-300 pump is offered together with three standard hydraulic units: “M” standard – for pressure of 552 – 1,034 bar, “H” standard – for pressure 1,034 – 1,379 bar, and “UH” standard – for pressure of 2,759 bar

Hydraulic unit:

All hydraulic units Partek from Gardner Denver have several features allowing to considerably increase service life and repairability.

  • All high pressure components are manufactured from high-hardness stainless steel, which prevents corrosion and adds to hardness.
  • Supply manifold is made of space aluminum and allows for operation even in sea water conditions, together with other rust-proof parts.
  • L-shaped unit configuration allows internal components to adapt so as to provide a maximum of performance and reliability.
  • Partek hydraulic units are designed to operate at the best of their performance allowing for a pump to run at a slow pace, which extends the pump service life.
  • Due to collet-type coupling of plungers (slip joints) they are better aligned, can be dismantled and replaced more conveniently.
  • Plungers and seals are lubricated and cooled by water. Unlike oil lubrication, water lubrication is ecologically cleaner, cheaper and requires a minimun of servicing.
  • Partek plungers are assembled so that plungers and seals could be easily and quickly replaced from the side of a power unit.
  • Valve seats are ring-shaped, which materially adds to their reliability under high loads in comparison with traditional valve cones.
  • A seal is automatically adjusted due to the internal spring, which makes it unnecessary to tighten the seal nuts regularly, as one does in other pumps.

“L” standard
Давление до 1034 бар (T-300M)

“L” standard represents a conventional industrial standard for hydromonitors. Simple structure allows for easy and quick replacement of valves, plungers and seals even in field conditions. Plungers are made of stainless steel with special coating and resistant to temperature extremes.

In-line arrangement
1,034-1,379 bar (T-300H)
1,379-2,759 bar (T-300UH)

Horizontal, in-line arrangement of inlet and outlet valves precludes occurrence of wave interference effect, which allows to operate at pressures over 1,000 bar. Unique technology of repair of valves and valve seats adds hundreds of hours to a pump service life at less costs. A plunger surface is coated with hard polished tungsten carbide, which ensures maximum extension of service life of plungers and seals.

Power unit:

  • Heavy steel crankshaft, tapered roller bearings and large pistons provide for high accuracy and impressive service life of the unit.
  • Body is made of cast iron.
  • Roomy oil tub provides for proper lubrication of all internal components.
  • Breather and special protectors prevent contamination of oil.
  • Indicator to monitor oil level in the unit.

Accessories:

  • Water-and-sandblasting equipment
  • Injection pump for piping mud out
  • Foot pedals
  • Jets of any configuration (simple, rotary and customized) to clean pipes
  • Flat, spot and rotary jets for surfaces
  • Lance tubes, hoses, high pressure flexible lances for cleaning of pipes and heat exchanger tubes
  • Reels for high pressure hoses (convenient for cleaning of pipes)
  • 300 – 3,000 litre water tanks
  • Booster pumps
  • Overalls
  • Additional filtration systems

Warranties:

  • Basic warranty – 1 year, extended warranty – 2 years.
  • Warranty and after warranty servicing, repair.

Video

Basic configurations

DT125-1032-38-Pe

Frame-mounted Ultra high pressure cleaner POSEIDON (Perkins 125 hp, pump Gardner Denver (USA), 1,032 bar, 38 l/min; hose, jet gun and jets are not included)

Working weight, kg

1634

Contracted price

Technical details:

Water supplyTechnical water, 60 °С max. (45°С max. is recommended)
Pump options, bar@l/min 1,032 bar 38 l/min1,400 bar 29 l/min2,800 bar 15 l/min
Pressure adjustmentBy means of jet caliber (standard) or high pressure regulator (optional)
High pressure pump Horizontal, crank-and-rod, with stainless steel unit and integrated plunger cooling system, T-300 Gardner Denver* (the USA)
High pressure pump protectionFrame-mounted booster pump (optional), pump dry running protection, high pressure safety valve with rupture disc
Type of high pressure pump drive Belt-drive configuration with fencing
Motor

Diesel motor with water cooling Perkins 11044D-E44TA featuring user-friendly control console, electrostarter and increased capacity battery.

  • Power – 125 hp (93 kW).
  • Fitted with protection against low oil pressure.
Fuel tank100 l
Water tanks100-litre surge tank made from aluminum or stainless steel fitted with filling control valve and drainage gauge, access door for cleaning. At request, an aggregate is completed with 300 – 3,000 litre water tanks, as per installation conditions.
DesignStandard or extended frame, mounting on dolly, trailer, chassis, container, heated container
Weight1,634 kg
Dimensions2,642х1,524х1,803 mm
WarrantyBasic warranty – 1 year, extended warranty – 2 years

DT125-1032-38-Pe

Frame-mounted Ultra high pressure cleaner POSEIDON (Perkins 125 hp, pump Gardner Denver (USA), 1,032 bar, 38 l/min; hose, jet gun and jets are not included)

Working weight, kg

1634

Contracted price

Brends

All brends

FEEDBACK FORM

SEND

Consultation

Enter your phone or email and we'll contact you!
Receive consultation

Send order

Enter your phone or email and we'll contact you!
SEND
Your request is sent successfully. We'll contact You soon.