Email us Сallback
Manufacturer of high-pressure jetting units "POSEIDON".
The equipment for repair, inspection, cleaning and installation of pipelines.
8-800-555-79-97
Сallback

Series of frame-mounted Poseidon E75US high pressure apparatus (1,000 – 2,800 bar)

Poseidon E75US apparatus series, 75 kW, 1,000-2,800 bar, 15-37 l/min

Manufacturer: Z-Techno (Russia)

Application:

Wide scope of application in heavy industry, agriculture, housing and utilities sector, and construction:

  • Hydrodynamic removal of solid residues from pipes
  • Cleaning of tubings
  • Cleaning of any kinds of surfaces including preparation of surfaces for applying of coatings without use of abrasive materials
  • Cleaning of boilers, heat exchangers, vaporizers and other equipment from residues and fur
  • Washing at construction sites, cleaning of construction framework, removal of concrete from mixers
  • Rennovation of concrete structures, scarification of concrete edifices, pointing of concrete joints, preparation of structures for anti-corrosive works, removal of plasterwork and painting
  • Cleaning of roads, bridges, tunnels, old coatings, insulation and congealed concrete solutions
  • Cleaning of airfield take-off runways
  • Removal of corrosion and painting traces from metal works, cutting of metal
  • Cleaning of tanks and vessels
  • Washing and cleaning of ships in dockage facilities

Contracted price In stock

Delivery worldwide.
Add to basket
Consultation
Send order

Technical details:

Water supplyTechnical water, up to 60 °С (up to 45°С is recommended)
Pump options, bar@l/min1,000 bar   37 l/min1,400 bar   29 l/min2,800 bar   15 l/min
Pressure adjustmentWith the use of jet bore (basic) or high pressure regulator (optional)
High pressure pumpHorizontal, crank-and-rod, with unit made of stainless steel and built-in plunger cooling system Gardner Denver T-300 (the US)
High pressure pump rotation rate600 rpm
High pressure pump protectionFrame-mounted booster pump, protection against dry running, safety valve with rupture disc
Type of high pressure pump driveBelt-drive configuration with fencing
MotorAsynchronous electromotor (Russia or Belarus), explosion-proof design is available. Power – 75 kW (380 V, 50 Hz).
Motor control Magnetic starter, phase control, current overload protection, light indication. If requested by a customer, it can be fitted with a star-delta starter connection to reduce load on a network upon energizing.
Water tanksIf requested individually, 300 – 3,000 litre water tanks can be supplied and assembled as per conditions. Water tanks are fitted with filling control valve and discharge gauge.
DesignA bulky or standard frame, mounting on a dolley, trailer, chassis, container, heated container
Weight1,530 kg (1,550 kg - in explosion-proof design)
Dimensions2438х1524х1397 mm
Warranty1 year, extended warranty – 2 years
 

Description:

High pressure equipment “Poseidon ” is a powerful solution for industrial cleaning of pipes and surfaces. Compact and user-friendly design, heavy-duty frame, and components from Italy, Germany, and the US make this equipment reliable and capable of application in all industry fields.
The apparatus are equipped with water tanks of any capacity and booster pump for usage under lack-of-water conditions .
We provide turnkey installation works on any chassis – ranging from a trailer to caravan, special vehicles being no exception – at the request of a customer.
Upon your request we are ready to offer individual solutions, for example system of automatic cleaning of pipes in a workshop (for tubings and other pipes to be renovated), system of cleaning of mixers from concrete, etc.

Features:

  • Ergonomic and endurable frame with powder painting. The apparatus is adapted for transportation with the use of a forklift.
  • Perfect standard tooling of an apparatus at affordable price.
  • Reliable electromotor of Russian or Belarus manufacture (not China!).
  • Major high pressure components are made by leading Italian manufacturers.
  • All necessary protection features of high pressure pump are already introduced into a basic configuration of an apparatus.
  • Repairability.
  • A large selection of accessories offered at special discounts for customers.
  • Service and technical support from specialists of Z-Techno throughout the territory of Russia and the Customs Union.
  • 15 years of expertise in manufacturing of high pressure equipment “Poseidon”.

T-300M pump/H/UH

T-300 pump consists of two main parts: power unit and hydraulic one. The first comprising crank shaft, connection rods, and pistons is intended to convert motor rotation to back-and-forth motion of plungers. Three standard units for T-300 pump are offered: “M” standard for pressure from 552 to 1,034 bar; “H” standard for pressure from 1,034 to 1,379 bar, and “UH” standard for pressure of 2,759 bar.

Hydraulic unit:

All Partek hydraulic units from company Gardner Denver possess several features allowing to considerably increase their service life and repairability.

  • All high pressure components are made of special high-strength stainless steel, which prevents corrosion.
  • Supply header is made of aircraft-grade aluminum and along with other non-corrodible parts makes it possible to operate even on sea water.
  • Due to “L”-type configuration of a hydraulic unit, inner components are automatically fitted in to ensure the best performance.
  • Partek hydraulic units are designed with a view of the highest possible efficiency so that a pump can operate at a slower pace, which increases its service life.
  • Collet-type connection of plungers (slip joints) provide for more precise alignment, more convenient dismounting and replacement.
  • Plungers and seals are lubricated and cooled by means of water. Unlike oil greasing, using of water lubricant is cleaner, cheaper and do not require much servicing.
  • Partek hydraulic units are assembled in a such way that plungers and seals can easily be accessed and replaced from the side of power unit.
  • Valve seats have a ring-like shape due to which they are much more reliable than ordinary valve cones when operating under high loads.
  • A seal is automatically adjusted due to inner spring so that there is no need to tighten the nut of the seal like in other pumps.

Standard «L»
Pressure of up to 1,034 bar (T-300M)

“L” standard is a generally accepted industry standard applied to hydraulic guns. Simple design allows an easy and quick replacement of valves, plungers and seals even in the field. Plungers made of stainless steel with a special coating, unlike ceramic ones, are resistant to excessive temperatures.

In-line arrangement
1,034-1,379 bar (T-300H)
1,379-2,759 bar (T-300UH)

Due to horizontal, in-line arrangement of inlet and outlet valves a wave interference phenomenon does not occur, which allows operating at pressures over 1,000 bar. Unique technology of valve and seat repair accrues hundreds of hours to a pump life and reduces costs at the same time. The surface of plunger has a polished hard tungsten carbide coating, which allows plungers and seals reach their maximum service life.

Power unit:

  • Heavy steel crank shaft, cone ballbearings and large pistons provides for high accuracy and tremendous service life of the unit.
  • The body is made of cast iron.
  • Large oil bath provides for sufficient lubrication of all internal components.
  • Breather and special reflectors prevent oil from contamination.
  • A gauge controls oil level in the unit.

Accessories:

  • Water- and sandblast tooling
  • Injection pump for pumping sludge out
  • Foot pedals
  • Jets of any configuration (simple, rotating and customized) to clean pipes
  • Flat, spot and rotating jets for surfaces
  • Lance tubes, high pressure lances for cleaning of heat exchangers
  • Reels for high pressure hoses (convenient option for cleaning of pipes)
  • 300 – 3,000 litre water tanks
  • Booster pumps
  • Overalls
  • Additional filtration systems

Warranties:

  • Basic warranty – 1 year, extended warranty – 2 years.
  • Warranty and after-warranty servicing and repair.

Video

Basic configurations

E75US-1400-29

Ultra high pressure cleaner POSEIDON (electro 75kW, pump Gardner Denver (USA), without accessories)

Working weight, kg

1530

Contracted price

Technical details:

Water supplyTechnical water, up to 60 °С (up to 45°С is recommended)
Pump options, bar@l/min1,000 bar   37 l/min1,400 bar   29 l/min2,800 bar   15 l/min
Pressure adjustmentWith the use of jet bore (basic) or high pressure regulator (optional)
High pressure pumpHorizontal, crank-and-rod, with unit made of stainless steel and built-in plunger cooling system Gardner Denver T-300 (the US)
High pressure pump rotation rate600 rpm
High pressure pump protectionFrame-mounted booster pump, protection against dry running, safety valve with rupture disc
Type of high pressure pump driveBelt-drive configuration with fencing
MotorAsynchronous electromotor (Russia or Belarus), explosion-proof design is available. Power – 75 kW (380 V, 50 Hz).
Motor control Magnetic starter, phase control, current overload protection, light indication. If requested by a customer, it can be fitted with a star-delta starter connection to reduce load on a network upon energizing.
Water tanksIf requested individually, 300 – 3,000 litre water tanks can be supplied and assembled as per conditions. Water tanks are fitted with filling control valve and discharge gauge.
DesignA bulky or standard frame, mounting on a dolley, trailer, chassis, container, heated container
Weight1,530 kg (1,550 kg - in explosion-proof design)
Dimensions2438х1524х1397 mm
Warranty1 year, extended warranty – 2 years
 

E75US-1400-29

Ultra high pressure cleaner POSEIDON (electro 75kW, pump Gardner Denver (USA), without accessories)

Working weight, kg

1530

Contracted price

Brends

All brends

FEEDBACK FORM

SEND

Consultation

Enter your phone or email and we'll contact you!
Receive consultation

Send order

Enter your phone or email and we'll contact you!
SEND
Your request is sent successfully. We'll contact You soon.