Series of Poseidon B24S-Th apparatus, 100–360 bar, 23/24/27 hp, 21–75 l/min with heating

Technical details:

Water supply	Technical water, max. 60°С (recommended - max. 45°С)
Pump options, bar@l/min	150 bar 50 l/min	200 bar 45 l/min1	250 bar 30 l/min	275 bar 26 l/min	300 bar 25 l/min	360 bar 21 l/min
Pressure adjustment	Available, fine (adjusting valve, By-pass system, pressure gauge)
High pressure pump	Three ceramic plungers, crank-and-rod (Italy)
HP pump speed	1450 rpm (reduced speed increases the life of the pump and is necessary to power the pump by gravity from the water tank)
HP pump protection	Pump dry run protection
HP pump drive type	Belt or gearbox drive (depending on design)
Engine	Two-cylinder 4-stroke gasoline engine Briggs&Stratton with electric starter (Japan). Power - 23 hp (17 kW). Fitted with oil pressure drop protection. Fuel consumption - 5.5 l/h		Two-cylinder 4-stroke gasoline engine Honda GX690 with electric starter. Power - 24 hp (18 kW). Fitted with oil pressure drop protection. Fuel consumption -  6.7 l/h.		Two-cylinder 4-stroke gasoline engine Lifan with electric starter. Power - 27 hp (20 kW). Fitted with oil pressure drop protection. Fuel consumption -  5.5 l/h.
Engine fuel tank	32 l (AI-92 gasoline or higher)
Water boiler	Diesel, 157 kW max. (135,000 kcal/h), temperature regulator from 30°С to 150°С, steam treatment option (special accessories are required for continuous operation at temperature over 100°С)
Non-stop operation of the boiler	100% of the working time
Boiler protection	Anti-scale system
Boiler power supply	12V, 80A generator ensures non-stop operation of the boiler (available if HP pump belt drive is employed)
Boiler fuel tank	32 l (diesel, kerosene, biodiesel, fuel oil)
Climatic design	System of filling pump and HP main line with antifreeze to protect against freezing in cold weather
HP hose	90 meter long, DN 12.7 mm
Reel for HP hose	With one-piece sidewalls, 6-position lock, hand-driven. Reel material – steel with 2-component coating. Fitted with hose chain Upon request, fitted with square roller guide for hose (С2 option). Upon request, reel is fitted with electric drive with variable speed of rotation (Electric option).
Reel design	On a flap door with outreach length of 1,290 mm, fitted with a handy positioning mechanism made on the basis of an adjustable clamp, with rigid fixation in any working position (allows working within a range from 0 to 120 degrees), holding down a steel guide and withstanding torques of up to 1,000 Nm. Upon request, design featuring a fixed reel position (FIX option).
Water tank and tank filling and drainage system	1,000-litre tank, with a drain sensor that automatically shuts down the engine. The tank filling system with a bayonet-type inlet located on the operator side. The water drain from the tank to the operator side.
Suction hose	up to 50 meters long, DN19 mm (FR option)
Reel for suction hose	Stationary, hand-driven, accommodates a hose up to 50 meters long and DN 19 mm (FR option)
Design	Mounting frame, power unit on shock mounts.
Nozzles are included (in "Reel" delivery set)	Two enhanced ZET-TECHNO nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚(optimal angle for this flow), with or no front jet
Weight, kg	387 kg (without water tank)
Dimensions	1,406х992х1,098 mm
Warranty	2 years. For Honda, Briggs&Stratton engines – 3 years

¹ - these pump parameters are only valid for a modification featuring Lifan engine. Parameters for Briggs and Honda are specified in the appropriate versions.

Description:

Note! The apparatus is effective for unfreezing pipelines.

This sewer flusher allows for fully making use of engine power to carry out efficient cleaning of pipelines. Due to the use of breakthrough Warthog slow rotation nozzles, the flusher is capable of cleaning sewers with a diameter of1,000 mm max. 
Due to an integrated water tank, the flusher can operate autonomously, and a number of mounted water tanks solely depends on your vehicle capacity.
This hydrodynamic equipment allows heating water up to 150°С, which facilitates cleaning process as well as degreases and disinfects the surface. Besides, cleaning of any contaminations, including non-fatty ones, requires less time.
When cleaning pipes, use of hot water not only increases speed of cleaning but also allows removing ice blockages and unfreeze pipelines.
Also, the apparatus allows carrying out efficient cleaning of any surfaces, including in a multiple-operation mode.
We perform a turnkey mounting on any chassis chosen by the customer – from a trailer to a van, including special-purpose vehicles.

Authorization from pump manufacturer
Annovi Reverberi (Italy)	Interpump (Italy)
UDOR (Italy)

Features:

• Extended turning door
• Generator to feed a boiler providing for non-stop operation
• Choice of pumps and engines
• Components from Europe and USA
• 20-year experience in production of Poseidon high pressure equipment

Accessories:

• Water and sand jet tooling
• Injector pump for pumping out mud
• Foot switches (pedals), convenient when cleaning pipes
• Pipe cleaning nozzles of any configuration (standard, rotary, customized)
• Flat, spot and rotary nozzles for surfaces
• Tips, hoses, flexible high-pressure lance for cleaning of pipes and heat exchanger tubes;
• Reels for high-pressure hoses (convenient for pipe cleaning)
• Plastic water tank with a volume of 300 – 3,000 l
• Special clothes
• Motor pumps, booster pumps and stations
• Additional filtration systems

Warranties:

• 2 years.For Honda, Briggs&Stratton engines – 3 years
• Warranty and post-warranty servicing

 

The Briggs&Stratton company is the largest and well known around the globe manufacturer of small-power internal combustion engines. In 2012, the company produced over 20,000,000 engines, which is 5,000,000 pieces more than the Honda company did. The most reliable engines produced by the Briggs&Stratton are those of Vanguard series that are being produced in Japan. Besides, the company owns the largest network of certified engine service centers in Russia and all over the world.

 

Video

Basic configurations