Email us Сallback
Manufacturer of high-pressure jetting units "POSEIDON".
The equipment for repair, inspection, cleaning and installation of pipelines.
8-800-555-79-97
Сallback

Series of Poseidon B24S flushers for mounting, 100-360 bar, 23/24/27 hp, 21-75 l/min

Series of Poseidon B24S apparatus, 100–360 bar, 23/24/27 hp, 21–75 l/min
Series of Poseidon B24S apparatus, 100–360 bar, 23/24/27 hp, 21–75 l/min

Manufacturer: Z-Techno (Russia)

Application:

Poseidon waterjet equipment is a state-of-art and affordable solution of for a number of cleaning tasks. Due to the use of innovative Warthog slow rotating nozzles, you are able to clean even the most heavily contaminated sewers.

Wide scope of application in all areas of industry, agriculture, housing and utilities, construction, and car servicing:

  • Waterjet flushing and cleaning of sewers and other pipes
  • Washing and waterjet cleaning of all types of surfaces, including surface preparation for coating application
  • Car washing (carriages, light- and heavy-duty vehicles, agriculture and construction machinery)
  • Cleaning and sanitization of floors, surfaces and equipment in food manufacturing enterprises (meat, dairy, pastry plants)
  • Washing surfaces in livestock farms, poultry yards, pig farms
  • Cleaning garbage chutes in buildings
  • Washing and removal of plasterwork and painting from building face, rehabilitation of facing slabs
  • Wash works at construction sites, cleaning of construction framework
  • Cleaning roads, bridges, tunnels, old coating, insulation and congealed concrete solution
  • Removal of tree bark
  • Washing floors and outdoor areas
  • Washing tanks and vessels

Contracted price In stock

Delivery worldwide.
Add to basket
Consultation
Send order

Technical details:

Water supplyTechnical water, max. 60°С (recommended - max. 45°С)*
Pump options, bar@l/min100 bar 75 l/min120 bar 70 l/min150 bar 50 l/min200 bar 45 l/min1250 bar 30 l/min275 bar 26 l/min300 bar 25 l/min360 bar 21 l/min
High pressure hose 90-meter long DN 12.7 mm90-meter long DN 10 mm
Pressure adjustmentAvailable, fine (adjusting valve, By-pass system)
High pressure pumpThree ceramic plungers, crank-and-rod (Italy)
HP pump protectionOverheat thermal sensor, pump dry run protection
HP pump drive typeBelt or gearbox drive (depending on design).
EngineTwo-cylinder 4-stroke gasoline engine Briggs&Stratton with electric starter (Japan).
  • Power- 23 hp (17 kW).
  • Fitted with oil pressure drop protection.
  • Fuel consumption - 5.5 l/h.
Two-cylinder 4-stroke gasoline engine Honda GX690 with electric starter.
  • Power - 24 hp (18 kW).
  • Fitted with oil pressure drop protection.
  •  Fuel consumption - 6.7 l/h.
Two-cylinder 4-stroke gasoline engine Lifan with electric starter.
  • Power - 27 hp (20 kW).
  • Fitted with oil pressure drop protection.
  • Fuel consumption - 5.5 l/h.
Fuel tank24 l
Climatic designSystem of filling pump and HP main line with antifreeze to protect against freezing
Reel for HP hoseWith one-piece sidewalls, 6-position lock, hand-driven. Reel material – steel with 2-component coating. Fitted with a hose chain. Upon request, fitted with square roller guide for hose (С2 option). Upon request, reel is fitted with electric drivewith variable speed of rotation (Electric option).
Reel designOn a flap door with outreach length of 830-990 mm (depending on modification) fitted with a handy positioning mechanism made on the basis of an adjustable clamp, with rigid fixation in any working position (allows working within a range from 0 to 120 degrees), holding down a steel guide and withstanding torques of up to 1,000 Nm. Upon request, design featuring a fixed reel position (FIX option).
Water tank and tank filling and drainage system1,000-litre tank, with a drain sensor that automatically shuts down the engine. The tank filling system with a bayonet-type inlet located on the operator side. The system of water drain from the tank to the operator side.
Suction hoseUp to 50 meters long, with DN 19 mm (FR option)
Reel for suction hoseStationary, hand-driven, accommodates hose up to 50 meters long and DN 19 mm (FR option)
DesignMounting frame, power unit on shock mounts
Water heatingDiesel boiler, 130 kW, 110,000 kcal/h (Th130 option)
Nozzles are included (in "Reel" delivery set)Two enhanced ZET-TECHNO nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚(optimal angle for this flow), with or no front jet
Weight208 kg (without water tank) 230 kg (Electric option, without water tank)
Power unit dimensions, WхDхH1,050х815х1,060 mm (standard design) 1,085х815х1,050 mm (design with Electric option)
Warranty2 years. For Honda, Briggs&Stratton engines – 3 years
* - can be used together with water boiler module, for washing with hot water. 1 - these pump parameters are only valid for a modification featuring Lifan engine. Parameters for Briggs and Honda are specified in the appropriate versions.

Description:

Authorization from pump manufacturer

Annovi Reverberi (Italy)

Interpump (Italy)

UDOR (Italy)

Features:

  • Upon request, standard and rotary nozzles with a preset location and number of holes.
  • Standard delivery set includes a reel for 90-meter hose.
  • Standard delivery set includes 90-meter high-pressure hose.
  • Special high-pressure hoses have a nominal bore of 12 mm, which allows for use of longer hoses without any substantial pressure decrease.
  • Appealing price and excellent performance.
  • Shutdown transducers when the apparatus is out of water in the tank or oil in the engine.
The Briggs&Stratton company is the largest and well known around the globe manufacturer of small-power internal combustion engines. In 2012, the company produced over 20,000,000 engines, which is 5,000,000 pieces more than an output of the Honda company.

The most reliable engines produced by the Briggs&Stratton are those of Vanguard series that are being produced in Japan. Besides, the company owns the largest network of certified engine service centers in Russia and all over the world.

 

Recommended accessories:


Protective sleeve for HP hose
Protects HP sleeve from damages and premature wear at the time it enters a pipe (it is set in the place where well walls mate the pipe being cleaned). It has a bright color and is fitted with clamping device.

Grenade tip/Bomb

Outstanding punching properties due to the smaller slant angle of output water jet, which ensures high output speed.

Application: removal of loose stony deposits, gravel, and soft deposits, preparation before use of special nozzles, flushing of pipes coming from structures to a main pipeline.


Chisel tip

Forward jets wash out softer deposits; arrow-headed design contributes to its penetration performance and allows for a more efficient removal of clogging; rear water jet allows for thrust and pipe flushing.

Application: cleaning of pipes from intertwined roots, freeing of frozen pipelines from buildings to a main pipeline.


Fluke bottom tip

Its heaviness and rear-located nozzles allow efficiently washing out contaminations from the pipe bottom.

Application: for cleaning of sand, pebble, stone and sludge deposits


Aquadrill tip with rotary forward water jet

The tip features a powerful rotating front nozzle, which is especially effective when removing blockages and cleaning of fully clogged pipes.

Application: removal of heavy contaminations


StoneAge Warthog slow rotation rotary tip (USA).

Due to slow rotation and leakproofness, water creates a local region of high pressure on the surface of deposit and by penetrating inside tears aparts the contamination structure from inside

Application: for elimination of emergency blockages, removal

 

 

 

Video

Basic configurations

Poseidon B24S-150-50-Br-Reel

High pressure cleaner POSEIDON on Skid frame (Briggs&Stratton(Japan) 23hp, pump Annovi Reverberi (Italy), manual driven hose reel, 12mm х 90m HP hose, 2 pipe cleaning nozzles, 1,000-litre water tank)

Working weight, kg

304.0

Contracted price

Technical details:

Water supplyTechnical water, max. 60°С (recommended - max. 45°С)*
Pump options, bar@l/min100 bar 75 l/min120 bar 70 l/min150 bar 50 l/min200 bar 45 l/min1250 bar 30 l/min275 bar 26 l/min300 bar 25 l/min360 bar 21 l/min
High pressure hose 90-meter long DN 12.7 mm90-meter long DN 10 mm
Pressure adjustmentAvailable, fine (adjusting valve, By-pass system)
High pressure pumpThree ceramic plungers, crank-and-rod (Italy)
HP pump protectionOverheat thermal sensor, pump dry run protection
HP pump drive typeBelt or gearbox drive (depending on design).
EngineTwo-cylinder 4-stroke gasoline engine Briggs&Stratton with electric starter (Japan).
  • Power- 23 hp (17 kW).
  • Fitted with oil pressure drop protection.
  • Fuel consumption - 5.5 l/h.
Two-cylinder 4-stroke gasoline engine Honda GX690 with electric starter.
  • Power - 24 hp (18 kW).
  • Fitted with oil pressure drop protection.
  •  Fuel consumption - 6.7 l/h.
Two-cylinder 4-stroke gasoline engine Lifan with electric starter.
  • Power - 27 hp (20 kW).
  • Fitted with oil pressure drop protection.
  • Fuel consumption - 5.5 l/h.
Fuel tank24 l
Climatic designSystem of filling pump and HP main line with antifreeze to protect against freezing
Reel for HP hoseWith one-piece sidewalls, 6-position lock, hand-driven. Reel material – steel with 2-component coating. Fitted with a hose chain. Upon request, fitted with square roller guide for hose (С2 option). Upon request, reel is fitted with electric drivewith variable speed of rotation (Electric option).
Reel designOn a flap door with outreach length of 830-990 mm (depending on modification) fitted with a handy positioning mechanism made on the basis of an adjustable clamp, with rigid fixation in any working position (allows working within a range from 0 to 120 degrees), holding down a steel guide and withstanding torques of up to 1,000 Nm. Upon request, design featuring a fixed reel position (FIX option).
Water tank and tank filling and drainage system1,000-litre tank, with a drain sensor that automatically shuts down the engine. The tank filling system with a bayonet-type inlet located on the operator side. The system of water drain from the tank to the operator side.
Suction hoseUp to 50 meters long, with DN 19 mm (FR option)
Reel for suction hoseStationary, hand-driven, accommodates hose up to 50 meters long and DN 19 mm (FR option)
DesignMounting frame, power unit on shock mounts
Water heatingDiesel boiler, 130 kW, 110,000 kcal/h (Th130 option)
Nozzles are included (in "Reel" delivery set)Two enhanced ZET-TECHNO nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚(optimal angle for this flow), with or no front jet
Weight208 kg (without water tank) 230 kg (Electric option, without water tank)
Power unit dimensions, WхDхH1,050х815х1,060 mm (standard design) 1,085х815х1,050 mm (design with Electric option)
Warranty2 years. For Honda, Briggs&Stratton engines – 3 years
* - can be used together with water boiler module, for washing with hot water. 1 - these pump parameters are only valid for a modification featuring Lifan engine. Parameters for Briggs and Honda are specified in the appropriate versions.

Poseidon B24S-150-50-Br-Reel

High pressure cleaner POSEIDON on Skid frame (Briggs&Stratton(Japan) 23hp, pump Annovi Reverberi (Italy), manual driven hose reel, 12mm х 90m HP hose, 2 pipe cleaning nozzles, 1,000-litre water tank)

Working weight, kg

304.0

Contracted price

Brends

All brends

FEEDBACK FORM

SEND

Consultation

Enter your phone or email and we'll contact you!
Receive consultation

Send order

Enter your phone or email and we'll contact you!
SEND
Your request is sent successfully. We'll contact You soon.