Series of Poseidon B35S-Manual-Th apparatus, 35 hp, 160-200 bar, 55-73 l/min

Manufacturer: ZET-TECHNO (Russia)

Application:

Poseidon waterjet equipment is an available and modern solution of cleaning tasks. Due to the use of breakthrough Warthog slow rotation nozzles, the waterjet equipment is capable of cleaning the most heavily contaminated sewers.

Wide scope of application in all sectors of industry, agriculture, housing and utilities, construction and car service:

Hydrodynamic flushing and cleaning of sewers and other pipes
Washing and waterjet cleaning of any surfaces, including their preparation for coating
Washing vehicles (train cars, light vehicles and trucks, agriculture and construction machinery and self-propelled vehicles)
Cleaning and disinfection of floors, surfaces and equipment at food industry enterprises (meat plants, dairy factories, confectionery industry)
Washing of surfaces at livestock farms, poultry houses, pig farms
Cleaning of garbage chutes in buildings
Washing and removal of stucco, paint from building facades, recovery of facing slabs
Washing works at construction sites, cleaning of construction framework
Cleaning of roads, bridges, tunnels from contaminations, old coatings, insulation and congealed cement solution
Removal of bark from lumber
Washing of floors and outdoor sites
Washing of tanks and vessels

Price: руб. In stock

Delivery worldwide.

Add to basket

Consultation

Send order

Technical details:

Water supply	Technical water, max. 60°С (recommended - max. 45°С)*
Pump options, bar@l/min (МPa@m3/h)	160 bar 73 l/min 16 МPa 4.4 m³/h	200 bar 55 l/min 20 МPa 3.3 m³/h
Pressure adjustment	Available, fine (adjusting valve, By-pass system)
High pressure pump	Three ceramic plungers, crank-and-rod, Hawk (Italy)
HP pump speed	1450 rpm (reduced speed increases the life of the pump and is necessary to power the pump by gravity from the water tank)
High pressure pump protection	Pump dry run protection
HP pump drive type	Reducing gearbox
Engine	2-cylinder air-cooled gasoline engine Loncin 1,000 cm³, with electro starter and motohour counter. Fitted with oil pressure drop protection. Fuel consumption - 8.5 l/h.
Fuel tank	24 l
Climatic design	System of filling pump and HP main line with antifreeze to protect against freezing in cold weather
High pressure hose	90 meters long, DN16 mm. Upon request, equipping with a 120-meter hose, DN16 mm (H120 option)
Reel for HP hose	Manual. With one-piece sidewalls and latch to prevent unwinding. Reel material – steel with 2-component coating.
Reel design	On a revolution door with outreach length of 1,050mm, fitted with a handy positioning mechanism made on the basis of an adjustable clamp, with rigid fixation in any working position (allows working within a range from 0 to 120 degrees), holding down a steel guide and withstanding torques of up to 1,000 Nm.
Water tank and tank filling and drain system	1,000-litre tank equipped with a drain gauge that automatically shuts down the engine. The tank filling system with a float valve for automatic monitoring of filling process. Water drain from tank to operating side.
Suction hose	Max. 50 meters long, DN19 mm (optional)
Reel for suction hose	Stationary, hand-driven, accommodates hose up to 50 meters long and DN 19 mm (optional)
Design	Vehicle-mounted frame. Power unit on shock mounts.
Water heating	Integrated module with boiler of max. 157 kW, 135,000 kcal/h
Nozzles are included (in "Reel" delivery set)	Two enhanced ZET-TECHNO nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚ (optimal angle for this flow), with or no front jet
Power unit weight	265 kg (without water tank)
Power unit dimensiosn, WхDхH	1,320х1,230х1,060 mm (without water tank)
Warranty	2 years

* - can be used together with water boiler module, for washing with hot water. (add. option)

Description:

Features:

Upon request, standard and rotary nozzles with desired location and number of holes.
High-pressure hoses have a nominal bore of 16 mm, which allows for use of longer hoses without any substantial pressure decrease.
Appealing price and excellent performance.
Shutdown gauges when the apparatus is out of water in the tank or oil in the engine.
Upon request, mounting on a van or car trailer. Installation of special laboratory, repair truck. Acquisition of vehicle logbook for a special vehicle.
Installation of extra tanks.

Recommended accessories:

	Top guiding roller Protects a high-pressure sleeve from damages and premature wear at the time it enters a sewage well or drain shaft (to be installed on the top edge of the pit cover)
	Protective sleeve for HP hose Protects HP sleeve from damages and premature wear at the time it enters a pipe (it is set in the place where well walls mate the pipe being cleaned). It has a bright color and is fitted with clamping device.
	Grenade tip/Bomb Outstanding clog busting characteristics due to the smaller slant angle of output water jet, which ensures high output speed. Application: removal of loose stony deposits, gravel, and soft deposits, preparation before use of special nozzles, flushing of pipes coming from structures to a main pipeline.
	Chisel tip Forward jets wash out softer deposits; wedge-shaped design improves its penetration performance and allows for a more efficient removal of clogging; rear water jet provides for thrust and pipe flushing. Application: cleaning of pipes from intertwined roots, freeing of frozen pipelines from buildings to a main pipeline.
	Fluke bottom tip Its heaviness and rear-located nozzles allow efficiently washing out debris from the pipe bottom. Application: for cleaning of sand, pebble, stone and sludge deposits
	Aquadrill tip with forward rotary jet The tip features a powerful rotating front nozzle, which is especially effective when removing blockages and cleaning of fully clogged pipes. Application: removal of heavy clogging (blockages)
	StoneAge Warthog slow rotation rotary tip (USA). Due to slow rotation and leakproofness, water creates a local region of high pressure on the surface of deposit and by penetrating inside tears apart the contamination structure from inside Application: for elimination of emergency blockages

Video

Basic configurations

Poseidon B35S-200-55-Lc-Manual-Th157-Reel

High pressure HOT water cleaner POSEIDON on Skid frame (Loncin 1,000 cm³, pump HAWK (Italy), integrated diesel hot water boiler 157kW (Italy), generator 3.5kW/220V, manual driven hose reel, 12.7mm х 90m HP hose, 2 pipe cleaning nozzles, 1,000-litre water tank)

Working weight, kg

440.0

Contracted price

Add to basket

Technical details:

Water supply	Technical water, max. 60°С (recommended - max. 45°С)*
Pump options, bar@l/min (МPa@m3/h)	160 bar 73 l/min 16 МPa 4.4 m³/h	200 bar 55 l/min 20 МPa 3.3 m³/h
Pressure adjustment	Available, fine (adjusting valve, By-pass system)
High pressure pump	Three ceramic plungers, crank-and-rod, Hawk (Italy)
HP pump speed	1450 rpm (reduced speed increases the life of the pump and is necessary to power the pump by gravity from the water tank)
High pressure pump protection	Pump dry run protection
HP pump drive type	Reducing gearbox
Engine	2-cylinder air-cooled gasoline engine Loncin 1,000 cm³, with electro starter and motohour counter. Fitted with oil pressure drop protection. Fuel consumption - 8.5 l/h.
Fuel tank	24 l
Climatic design	System of filling pump and HP main line with antifreeze to protect against freezing in cold weather
High pressure hose	90 meters long, DN16 mm. Upon request, equipping with a 120-meter hose, DN16 mm (H120 option)
Reel for HP hose	Manual. With one-piece sidewalls and latch to prevent unwinding. Reel material – steel with 2-component coating.
Reel design	On a revolution door with outreach length of 1,050mm, fitted with a handy positioning mechanism made on the basis of an adjustable clamp, with rigid fixation in any working position (allows working within a range from 0 to 120 degrees), holding down a steel guide and withstanding torques of up to 1,000 Nm.
Water tank and tank filling and drain system	1,000-litre tank equipped with a drain gauge that automatically shuts down the engine. The tank filling system with a float valve for automatic monitoring of filling process. Water drain from tank to operating side.
Suction hose	Max. 50 meters long, DN19 mm (optional)
Reel for suction hose	Stationary, hand-driven, accommodates hose up to 50 meters long and DN 19 mm (optional)
Design	Vehicle-mounted frame. Power unit on shock mounts.
Water heating	Integrated module with boiler of max. 157 kW, 135,000 kcal/h
Nozzles are included (in "Reel" delivery set)	Two enhanced ZET-TECHNO nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚ (optimal angle for this flow), with or no front jet
Power unit weight	265 kg (without water tank)
Power unit dimensiosn, WхDхH	1,320х1,230х1,060 mm (without water tank)
Warranty	2 years