Email us Сallback
Manufacturer of high-pressure jetting units "POSEIDON".
The equipment for repair, inspection, cleaning and installation of pipelines.
8-800-555-79-97
Сallback

Series of Poseidon B40S sewer flushers (35/40 hp)

Manufacturer: Z-Techno (Russia)

Application:

Poseidon waterjet equipment is an available and modern solution of cleaning tasks. Due to the use of breakthrough Warthog slow rotation nozzles, the waterjet equipment is capable of cleaning the most heavily contaminated sewers.

Wide scope of application in all sectors of industry, agriculture, housing and utilities, construction and car service:

  • Hydrodynamic flushing and cleaning of sewers and other pipes
  • Washing and waterjet cleaning of any surfaces, including their preparation for coating
  • Washing vehicles (train cars, light vehicles and trucks, agriculture and construction machinery and self-propelled vehicles)
  • Cleaning and disinfection of floors, surfaces and equipment at food industry enterprises (meat plants, dairy factories, confectionery industry)
  • Washing of surfaces at livestock farms, poultry houses, pig farms
  • Cleaning of garbage chutes in buildings
  • Washing and removal of stucco, paint from building facades, recovery of facing slabs
  • Washing works at construction sites, cleaning of construction framework
  • Cleaning of roads, bridges, tunnels from contaminations, old coatings, insulation and congealed cement solution
  • Removal of bark from lumber
  • Washing of floors and outdoor sites
  • Washing of tanks and vessels

Contracted price In stock

Delivery worldwide.
Add to basket
Consultation
Send order

Technical details:

Water supplyTechnical water, max. 60°С (recommended - max. 45°С)*
Pump options, bar@l/min (МPа@m3/h)100 bar 142 l/min (10 МPа 8.5 m3/h)120 bar 120 l/min (12 МPа 7.2 m3/h)150 bar 90 l/min (15 МPа 5.4 m3/h)175 bar 80 l/min (17.5 МPа 4.8 m3/h)200 bar 55 l/min (20 МPа 3.3 m3/h)200 bar 70 l/min (20 МPа 4.2 m3/h)250 bar 51 l/min (25 МPа 3 m3/h)320 bar 43 l/min (32 МPа 2.6 m3/h)
Pressure adjustmentAvailable, fine (adjusting valve, By-pass system)
High pressure pumpThree ceramic plungers, crank-and-rod (Italy)
HP pump protectionPump dry run protection
HP pump drive typeBelt drive with guard
EngineTwo-cylinder air-cooled gasoline engine Briggs&Stratton (Japan).
  • Power -   35 hp (25.7 kW).
  • Fitted with oil pressure drop protection.
  • Fuel consumption - 8.9 l/h.
Two-cylinder air-cooled gasoline engine KOHLER (Italy).
  • Power -  40 hp (29.4 kW).
  • Fitted with oil pressure drop protection.
  • Fuel consumption - 10.6 l/h.
Fuel tank24 l
Climatic designSystem of filling pump and HP main line with antifreeze to protect against freezing in cold weather
High pressure hose90 meters long, DN16 mm. Upon request, supply of 120-meter hose with DN16 mm (H120 option)
Reel for HP hoseWith one-piece sidewalls, hydraulic drive and fine rotation speed adjustment. Hydraulic brake Reel material – steel with 2-component coating. Fitted with a hose chain. Upon request, fitted with square roller guide for hose (С2 option). Upon request, design with a hand-driven reel (Manual option). Upon request, reel is fitted with electric drive with variable rotation speed (Electric option).
Reel designOn a revolution door with outreach length of 1,110-1,170 mm (depending on modification) fitted with a handy positioning mechanism made on the basis of an adjustable clamp, with rigid fixation in any working position (allows working within a range from 0 to 120 degrees), holding down a steel guide and withstanding torques of up to 1,000 Nm. Upon request, design featuring a fixed reel position (FIX option).
Water tank and tank filling and drainage system1,000-litre tank, with a drain sensor that automatically shuts down the engine. The tank filling system with a bayonet-type inlet located on the operator side. The system of water drain from the tank to the operator side.
Suction hoseUp tp 50 meters long, DN19 mm (optional)
Reel for suction hoseStationary, hand-driven, accommodates a hose up to 50 meters long, with DN 19 mm (optional)
DesignVehicle-mounted frame. Power unit on shock mounts.
Water heatingDiesel boiler, 130 kW, 110,000 kcal/h (Th130 option)
Nozzles are included (in "Reel" delivery set) Two enhanced ZET-TECHNO nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚(optimal angle for this flow), with or no front jet
Power unit weight377 kg (standard design, without water tank). 312 kg (Manual/Electric option, without water tank). 322 kg (FIX option, without water tank).
Power unit dimensions, WхDхH1,300х1,240х1,050 mm (standard option), 1,315х1,060х1,130 mm (Manual/Electric option), 1,270х1,290х1,280 mm (FIX option).
Warranty2 years. For Briggs&Stratton engine – 3 years
 
* - can be used together with water boiler module, for washing with hot water.

Description:

Authorization from pump manufacturer

Annovi Reverberi (Italy)

UDOR (Italy)

Interpump (Italy)

Features:

  • Upon request, standard and rotary nozzles with a preset location and number of holes.
  • High-pressure hoses have a nominal bore of 16 mm, which allows for use of longer hoses without any substantial pressure decrease.
  • Appealing price and excellent performance.
  • Shutdown gauges when the apparatus is out of water in the tank or oil in the engine.
  • Upon request, mounting on a van or car trailer. Installation of special laboratory, repair truck. Acquisition of vehicle logbook for a special vehicle.
  • Installation of extra tanks.

Recommended accessories:


Top guiding roller
Protects a high-pressure sleeve from damages and premature wear at the time it enters a sewage well or drain shaft (to be installed on the top edge of the pit cover)

Protective sleeve for HP hose
Protects a high-pressure sleeve from damages and premature wear at the time it enters a pipe (it is set in the place where well walls mate the pipe being cleaned). It has a bright color and is fitted with clamping device.

Grenade tip/Bomb

Outstanding punching properties due to the smaller slant angle of output water jet, which ensures high output speed.

Application: removal of loose stony deposits, gravel, and soft deposits, preparation before use of special nozzles, flushing of pipes coming from structures to a main pipeline.


Chisel tip

Forward jets wash out softer deposits; arrow-headed design contributes to its penetration performance and allows for a more efficient removal of clogging; rear water jet provides for thrust and pipe flushing.

Application: cleaning of pipes from intertwined roots, freeing of frozen pipelines from buildings to a main pipeline.


Fluke bottom tip

Its heaviness and rear-located nozzles allow efficiently washing out contaminations from the pipe bottom.

Application: for cleaning of sand, pebble, stone and sludge deposits


Aquadrill tip with rotary front water jet

The tip features a powerful rotating front nozzle, which is especially effective when removing blockages and cleaning of fully clogged pipes.

Application: removal of heavy blockages


StoneAge Warthog slow rotation tip (USA).

Due to slow rotation and absence of leaks, water creates a local region of high pressure on the surface of deposits and by penetrating inside tears aparts the contamination structure from inside

Application: for elimination of emergency blockages

Video




Basic configurations

Poseidon B40S-150-90-Br-Reel

High pressure cleaner POSEIDON on Skid frame (Briggs&Stratton(Japan) 35hp, pump Annovi Reverberi (Italy), hydraulic drive hose reel, 16mm х 90m HP hose, 2 pipe cleaning nozzles, 1,000-litre water tank)

Working weight, kg

440.0

Contracted price

Technical details:

Water supplyTechnical water, max. 60°С (recommended - max. 45°С)*
Pump options, bar@l/min (МPа@m3/h)100 bar 142 l/min (10 МPа 8.5 m3/h)120 bar 120 l/min (12 МPа 7.2 m3/h)150 bar 90 l/min (15 МPа 5.4 m3/h)175 bar 80 l/min (17.5 МPа 4.8 m3/h)200 bar 55 l/min (20 МPа 3.3 m3/h)200 bar 70 l/min (20 МPа 4.2 m3/h)250 bar 51 l/min (25 МPа 3 m3/h)320 bar 43 l/min (32 МPа 2.6 m3/h)
Pressure adjustmentAvailable, fine (adjusting valve, By-pass system)
High pressure pumpThree ceramic plungers, crank-and-rod (Italy)
HP pump protectionPump dry run protection
HP pump drive typeBelt drive with guard
EngineTwo-cylinder air-cooled gasoline engine Briggs&Stratton (Japan).
  • Power -   35 hp (25.7 kW).
  • Fitted with oil pressure drop protection.
  • Fuel consumption - 8.9 l/h.
Two-cylinder air-cooled gasoline engine KOHLER (Italy).
  • Power -  40 hp (29.4 kW).
  • Fitted with oil pressure drop protection.
  • Fuel consumption - 10.6 l/h.
Fuel tank24 l
Climatic designSystem of filling pump and HP main line with antifreeze to protect against freezing in cold weather
High pressure hose90 meters long, DN16 mm. Upon request, supply of 120-meter hose with DN16 mm (H120 option)
Reel for HP hoseWith one-piece sidewalls, hydraulic drive and fine rotation speed adjustment. Hydraulic brake Reel material – steel with 2-component coating. Fitted with a hose chain. Upon request, fitted with square roller guide for hose (С2 option). Upon request, design with a hand-driven reel (Manual option). Upon request, reel is fitted with electric drive with variable rotation speed (Electric option).
Reel designOn a revolution door with outreach length of 1,110-1,170 mm (depending on modification) fitted with a handy positioning mechanism made on the basis of an adjustable clamp, with rigid fixation in any working position (allows working within a range from 0 to 120 degrees), holding down a steel guide and withstanding torques of up to 1,000 Nm. Upon request, design featuring a fixed reel position (FIX option).
Water tank and tank filling and drainage system1,000-litre tank, with a drain sensor that automatically shuts down the engine. The tank filling system with a bayonet-type inlet located on the operator side. The system of water drain from the tank to the operator side.
Suction hoseUp tp 50 meters long, DN19 mm (optional)
Reel for suction hoseStationary, hand-driven, accommodates a hose up to 50 meters long, with DN 19 mm (optional)
DesignVehicle-mounted frame. Power unit on shock mounts.
Water heatingDiesel boiler, 130 kW, 110,000 kcal/h (Th130 option)
Nozzles are included (in "Reel" delivery set) Two enhanced ZET-TECHNO nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚(optimal angle for this flow), with or no front jet
Power unit weight377 kg (standard design, without water tank). 312 kg (Manual/Electric option, without water tank). 322 kg (FIX option, without water tank).
Power unit dimensions, WхDхH1,300х1,240х1,050 mm (standard option), 1,315х1,060х1,130 mm (Manual/Electric option), 1,270х1,290х1,280 mm (FIX option).
Warranty2 years. For Briggs&Stratton engine – 3 years
 
* - can be used together with water boiler module, for washing with hot water.

Poseidon B40S-150-90-Br-Reel

High pressure cleaner POSEIDON on Skid frame (Briggs&Stratton(Japan) 35hp, pump Annovi Reverberi (Italy), hydraulic drive hose reel, 16mm х 90m HP hose, 2 pipe cleaning nozzles, 1,000-litre water tank)

Working weight, kg

440.0

Contracted price




Brends

All brends

FEEDBACK FORM

SEND

Consultation

Enter your phone or email and we'll contact you!
Receive consultation

Send order

Enter your phone or email and we'll contact you!
SEND
Your request is sent successfully. We'll contact You soon.