Manufacturer of high-pressure jetting units "POSEIDON".
The equipment for repair, inspection, cleaning and installation of pipelines.
The equipment for repair, inspection, cleaning and installation of pipelines.
Brend
8-800-555-79-97
Manufacturer: ZET-TECHNO (Russia)
Application:
Poseidon waterjet equipment is an available and modern solution of cleaning tasks. Due to the use of breakthrough Warthog slow rotation nozzles, the waterjet equipment is capable of cleaning the most heavily contaminated sewers.
Wide scope of application in all sectors of industry, agriculture, housing and utilities, construction and car service:
Price: руб. In stock
| Water supply | Technical water, max. 60°С (recommended - max. 45°С)* | |
| Pump options, bar@l/min (МPa@m3/h) | 150 bar 140 l/min (16 МPa 8.4 m3/h) | 200 bar 110 l/min (20 МPa 6.6 m3/h) |
| Pressure adjustment | Available, fine (adjusting valve, By-pass system) | |
| High pressure hose | Length 90 meters Internal passage 19 mm | |
| High pressure pump | Three-plunger, crank, with ceramic plungers Hawk (Italy). | |
| HP pump protection | Pump dry run protection | |
| HP pump drive type | Reduction gear | |
| Engine | Two engines: Loncin 2-cylinder air-cooled 1000cc petrol engine with electric starter and hour meter. Equipped with oil pressure drop protection. Fuel consumption on one engine - 8.5 l / h. Control panel with separate motor control, with LED indication | |
| Fuel tank | 24 l | |
| Climatic design | System of filling pump and HP main line with antifreeze to protect against freezing in cold weather | |
| Reel for HP hose | Manual. With solid sidewalls, lock and speed control system. Drum material - steel with a two-component coating. | |
| Reel design | On a revolution door with outreach length of 1,050 mm fitted with a handy positioning mechanism made on the basis of an adjustable clamp, with rigid fixation in any working position (allows working within a range from 0 to 120 degrees), holding down a steel guide and withstanding torques of up to 1,000 Nm. | |
| Water tank and tank filling and drainage system | 1,000-litre tank, with a drain sensor that automatically shuts down the engine. The tank filling system with a bayonet-type inlet located on the operator side. The system of water drain from the tank to the operator side. | |
| Suction hose | Up tp 50 meters long, DN19 mm (optional) | |
| Reel for suction hose | Stationary, hand-driven, accommodates a hose up to 50 meters long, with DN 19 mm (optional) | |
| Design | Vehicle-mounted frame. Power unit on shock mounts. | |
| Water heating | Diesel boiler, 157 kW, 135,000 kcal/h (Th130 option) | |
| Nozzles are included (in "Reel" delivery set) | Two enhanced ZET-TECHNO nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚(optimal angle for this flow), with or no front jet | |
| Power unit weight | 265 kg (without water tank) | |
| Power unit dimensions, WхDхH | 1,320х1,230х1,060 mm (without water tank) | |
| Warranty | 2 years | |
| Features | On request, equipment with an additional HP snare drum with a lightweight polymer hose 40 meters long with a passage of 12.7 mm (optional RR40-12) | |
Features:
Recommended accessories:
 | Top guiding roller Protects a high-pressure sleeve from damages and premature wear at the time it enters a sewage well or drain shaft (to be installed on the top edge of the pit cover) |
 | Protective sleeve for HP hose Protects a high-pressure sleeve from damages and premature wear at the time it enters a pipe (it is set in the place where well walls mate the pipe being cleaned). It has a bright color and is fitted with clamping device. |
 | Grenade tip/Bomb Outstanding punching properties due to the smaller slant angle of output water jet, which ensures high output speed. Application: removal of loose stony deposits, gravel, and soft deposits, preparation before use of special nozzles, flushing of pipes coming from structures to a main pipeline. |
 | Chisel tip Forward jets wash out softer deposits; arrow-headed design contributes to its penetration performance and allows for a more efficient removal of clogging; rear water jet provides for thrust and pipe flushing. Application: cleaning of pipes from intertwined roots, freeing of frozen pipelines from buildings to a main pipeline. |
 | Fluke bottom tip Its heaviness and rear-located nozzles allow efficiently washing out contaminations from the pipe bottom. Application: for cleaning of sand, pebble, stone and sludge deposits |
 | Aquadrill tip with rotary front water jet The tip features a powerful rotating front nozzle, which is especially effective when removing blockages and cleaning of fully clogged pipes. Application: removal of heavy blockages |
 | StoneAge Warthog slow rotation tip (USA). Due to slow rotation and absence of leaks, water creates a local region of high pressure on the surface of deposits and by penetrating inside tears aparts the contamination structure from inside Application: for elimination of emergency blockages |
Poseidon B70S-150-140-2Lc-Manual-Reel
High pressure cleaner POSEIDON on Skid frame (two Loncin 1000cm³ internal combustion engines, two Hawk pumps (Italy), a manually operated swivel drum, a 16mm x 90m hose, 2 pipe cleaning nozzles, a 1000l tank)
Working weight, kg
265.0
| Water supply | Technical water, max. 60°С (recommended - max. 45°С)* | |
| Pump options, bar@l/min (МPa@m3/h) | 150 bar 140 l/min (16 МPa 8.4 m3/h) | 200 bar 110 l/min (20 МPa 6.6 m3/h) |
| Pressure adjustment | Available, fine (adjusting valve, By-pass system) | |
| High pressure hose | Length 90 meters Internal passage 19 mm | |
| High pressure pump | Three-plunger, crank, with ceramic plungers Hawk (Italy). | |
| HP pump protection | Pump dry run protection | |
| HP pump drive type | Reduction gear | |
| Engine | Two engines: Loncin 2-cylinder air-cooled 1000cc petrol engine with electric starter and hour meter. Equipped with oil pressure drop protection. Fuel consumption on one engine - 8.5 l / h. Control panel with separate motor control, with LED indication | |
| Fuel tank | 24 l | |
| Climatic design | System of filling pump and HP main line with antifreeze to protect against freezing in cold weather | |
| Reel for HP hose | Manual. With solid sidewalls, lock and speed control system. Drum material - steel with a two-component coating. | |
| Reel design | On a revolution door with outreach length of 1,050 mm fitted with a handy positioning mechanism made on the basis of an adjustable clamp, with rigid fixation in any working position (allows working within a range from 0 to 120 degrees), holding down a steel guide and withstanding torques of up to 1,000 Nm. | |
| Water tank and tank filling and drainage system | 1,000-litre tank, with a drain sensor that automatically shuts down the engine. The tank filling system with a bayonet-type inlet located on the operator side. The system of water drain from the tank to the operator side. | |
| Suction hose | Up tp 50 meters long, DN19 mm (optional) | |
| Reel for suction hose | Stationary, hand-driven, accommodates a hose up to 50 meters long, with DN 19 mm (optional) | |
| Design | Vehicle-mounted frame. Power unit on shock mounts. | |
| Water heating | Diesel boiler, 157 kW, 135,000 kcal/h (Th130 option) | |
| Nozzles are included (in "Reel" delivery set) | Two enhanced ZET-TECHNO nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚(optimal angle for this flow), with or no front jet | |
| Power unit weight | 265 kg (without water tank) | |
| Power unit dimensions, WхDхH | 1,320х1,230х1,060 mm (without water tank) | |
| Warranty | 2 years | |
| Features | On request, equipment with an additional HP snare drum with a lightweight polymer hose 40 meters long with a passage of 12.7 mm (optional RR40-12) | |
Poseidon B70S-150-140-2Lc-Manual-Reel
High pressure cleaner POSEIDON on Skid frame (two Loncin 1000cm³ internal combustion engines, two Hawk pumps (Italy), a manually operated swivel drum, a 16mm x 90m hose, 2 pipe cleaning nozzles, a 1000l tank)
Working weight, kg
265.0
