Email us Сallback
Manufacturer of high-pressure jetting units "POSEIDON".
The equipment for repair, inspection, cleaning and installation of pipelines.
8-800-555-79-97
Сallback

Series of Poseidon D67S apparatus, 67 hp, 160 – 310 bar, 75 – 160 l/min

Manufacturer: ZET-TECHNO (Russia)

Application:

Poseidon waterjet equipment is an available and modern solution of cleaning tasks. Due to the use of breakthrough Warthog slow rotation nozzles, the waterjet equipment is capable of cleaning the most heavily contaminated sewers.

Wide scope of application in all sectors of industry, agriculture, housing and utilities, construction and car service:

  • Hydrodynamic flushing and cleaning of sewers and other pipes
  • Washing and waterjet cleaning of any surfaces, including their preparation for coating
  • Washing vehicles (train cars, light vehicles and trucks, agriculture and construction machinery and self-propelled vehicles)
  • Cleaning and disinfection of floors, surfaces and equipment at food industry enterprises (meat plants, dairy factories, confectionery industry)
  • Washing of surfaces at livestock farms, poultry houses, pig farms
  • Cleaning of garbage chutes in buildings
  • Washing and removal of stucco, paint from building facades, recovery of facing slabs
  • Washing works at construction sites, cleaning of construction framework
  • Cleaning of roads, bridges, tunnels from contaminations, old coatings, insulation and congealed cement solution
  • Removal of bark from lumber
  • Washing of floors and outdoor sites
  • Washing of tanks and vessels

Price: руб. In stock

Delivery worldwide.
Add to basket
Consultation
Send order

Technical details:

Water supplyTechnical water, max. 60°С (recommended - max. 45°С)
Apparatus parameters, bar@l/min (МPa@m3/h)160 bar 160 l/min (16 МPa 9.6 m3/h)185 bar 130 l/min (18.5 МPa 7.8 m3/h)230 bar 100 l/min (23 МPa 6 m3/h)310 bar 75 l/min (31 МPa 4.5 m3/h)
High pressure hose90-meter long DN 19 mm90-meter long DN 16 mm
Pressure adjustmentAvailable, fine (adjusting valve, By-pass system)
High pressure pumpThree ceramic plungers, crank-and-rod (Italy)
HP pump speed 1000 rpm (reduced speed increases the life of the pump and is necessary to power the pump by gravity from the water tank)
HP pump protectionPump dry run protection
HP pump drive typeBelt drive with guard
Engine4-cylinder diesel engine with water cooling Kubota(Japan).
  • Power - 67 hp (49 kW).
  • Fitted with oil pressure drop protection. 
  • Fuel consumption - 16.3 l/h.
Engine cooling and water heatingWater heat exchanger (without radiator) utilizing the heat generated by an engine for heating of water, which enhances the apparatus performance, especially in cold weather.
Climatic designWater heat exchanger (without radiator) utilizing the heat generated by an engine for heating of water, which enhances the apparatus performance, especially in cold weather
Reel for HP hoseWith direct drive (without a chain), which provides superior reliability and tremendous power characteristics. Traction force - 250 kgf. Reinforced reel with one-piece sidewalls, hydraulic drive and fine rotation speed adjustment. Hydraulic brake. Reel material - steel, powder coating. Equipped with a hose chain. Upon request, design with reel electrodrive with variable rotation speed (Electric options).
Reel designOn a revolution door with outreach length of 1,120 mm, fitted with a handy positioning mechanism made on the basis of an adjustable clamp, with rigid fixation in any working position (allows working within a range from 0 to 120 degrees), holding down a steel guide and withstanding torques of up to 1,000 Nm. Upon request, design featuring a fixed reel position (FIX option).
Water tank and tank filling and drainage system1,000-litre tank, with a drain sensor that automatically shuts down the engine. The tank filling system with a bayonet-type inlet located on the operator side. Water drain from tank to operating side.
Suction hosemax. 50 meters long, DN19 mm (FR option)
Reel for suction hoseStationary, hand-driven, accommodates hose up to 50 meters long and DN 19 mm (FR option)
DesignVehicle-mounted frame. Power unit on shock mounts.
Water heatingDiesel boiler, 130 kW, 110,000 kcal/h (Th130 option)
Nozzles are included (in "Reel" delivery setTwo enhanced ZET-TECHNO nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚ (optimal angle for this flow), with or no front jet
Power unit weight735 kg (without water tank)
Power unit dimensions, WхDхH1,350 х 1,460 х 1,245 mm (height is specified without muffler)
WarrantyFor engine - 5 years, for apparatus - 2 years

Description:

Features:

Authorization from pump manufacturer

UDOR (Italy)

Annovi Reverberi (Italy)

  • Appealing price and excellent performance
  • High-pressure hoses included have a large nominal bore, which allows for use of longer hoses without any substantial pressure decrease
  • The heat exchanger of engine cooling provides for water heating up to 55°С (pump limit), if necessary. This feature substantially enhances the possibilities of the apparatus, especially in cold weather
  • Shutdown gauges when the apparatus is out of water in the tank or oil in the engine in standard delivery set
  • Standard delivery set includes a reel on revolution door with hydraulic drive, speed control and a 90-meter HP hose
  • Upon request, mounting on a van or car trailer. Installation of special laboratory, repair truck. Acquisition of vehicle logbook for a special vehicle
  • Installation of extra water tanks
  • Upon request, standard and rotary nozzles with a preset location and number of holes.

 

Recommended accessories:


Top guiding roller
Protects a high-pressure sleeve from damages and premature wear at the time it enters a sewage well or drain shaft (to be installed on the top edge of the pit cover)

Protective sleeve for HP hose
Protects HP sleeve from damages and premature wear at the time it enters a pipe (it is set in the place where well walls mate the pipe being cleaned). It has a bright color and is fitted with clamping device.

Grenade tip/Bomb

Outstanding clog busting characteristics due to the smaller slant angle of output water jet, which ensures high output speed.

Application: removal of loose stony deposits, gravel, and soft deposits, preparation before use of special nozzles, flushing of pipes coming from structures to a main pipeline.


Chisel tip

Forward jets wash out softer deposits; wedge-shaped design improves its penetration performance and allows for a more efficient removal of clogging; rear water jet provides for thrust and pipe flushing.

Application: cleaning of pipes from intertwined roots, freeing of frozen pipelines from buildings to a main pipeline.


Fluke bottom tip

Its heaviness and rear-located nozzles allow efficiently washing out debris from the pipe bottom.

Application: for cleaning of sand, pebble, stone and sludge deposits


Aquadrill tip with forward rotary jet

The tip features a powerful rotating front nozzle, which is especially effective when removing blockages and cleaning of fully clogged pipes.

Application: removal of heavy cloggings (blockages)


StoneAge Warthog slow rotation rotary tip (USA).

Due to slow rotation and leakproofness, water creates a local region of high pressure on the surface of deposit and by penetrating inside tears apart the contamination structure from inside

Application: for elimination of emergency blockages

 

 

 

Video




Basic configurations

Poseidon D67S-160-160-Ku-Reel

High pressure cleaner POSEIDON on Skid frame (Kubota 67hp, pump UDOR (Italy), hydraulic drive hose reel, 19mm х 90m HP hose, 2 pipe cleaning nozzles, 1,000-litre water tank)

Working weight, kg

825.0

Contracted price

Technical details:

Water supplyTechnical water, max. 60°С (recommended - max. 45°С)
Apparatus parameters, bar@l/min (МPa@m3/h)160 bar 160 l/min (16 МPa 9.6 m3/h)185 bar 130 l/min (18.5 МPa 7.8 m3/h)230 bar 100 l/min (23 МPa 6 m3/h)310 bar 75 l/min (31 МPa 4.5 m3/h)
High pressure hose90-meter long DN 19 mm90-meter long DN 16 mm
Pressure adjustmentAvailable, fine (adjusting valve, By-pass system)
High pressure pumpThree ceramic plungers, crank-and-rod (Italy)
HP pump speed 1000 rpm (reduced speed increases the life of the pump and is necessary to power the pump by gravity from the water tank)
HP pump protectionPump dry run protection
HP pump drive typeBelt drive with guard
Engine4-cylinder diesel engine with water cooling Kubota(Japan).
  • Power - 67 hp (49 kW).
  • Fitted with oil pressure drop protection. 
  • Fuel consumption - 16.3 l/h.
Engine cooling and water heatingWater heat exchanger (without radiator) utilizing the heat generated by an engine for heating of water, which enhances the apparatus performance, especially in cold weather.
Climatic designWater heat exchanger (without radiator) utilizing the heat generated by an engine for heating of water, which enhances the apparatus performance, especially in cold weather
Reel for HP hoseWith direct drive (without a chain), which provides superior reliability and tremendous power characteristics. Traction force - 250 kgf. Reinforced reel with one-piece sidewalls, hydraulic drive and fine rotation speed adjustment. Hydraulic brake. Reel material - steel, powder coating. Equipped with a hose chain. Upon request, design with reel electrodrive with variable rotation speed (Electric options).
Reel designOn a revolution door with outreach length of 1,120 mm, fitted with a handy positioning mechanism made on the basis of an adjustable clamp, with rigid fixation in any working position (allows working within a range from 0 to 120 degrees), holding down a steel guide and withstanding torques of up to 1,000 Nm. Upon request, design featuring a fixed reel position (FIX option).
Water tank and tank filling and drainage system1,000-litre tank, with a drain sensor that automatically shuts down the engine. The tank filling system with a bayonet-type inlet located on the operator side. Water drain from tank to operating side.
Suction hosemax. 50 meters long, DN19 mm (FR option)
Reel for suction hoseStationary, hand-driven, accommodates hose up to 50 meters long and DN 19 mm (FR option)
DesignVehicle-mounted frame. Power unit on shock mounts.
Water heatingDiesel boiler, 130 kW, 110,000 kcal/h (Th130 option)
Nozzles are included (in "Reel" delivery setTwo enhanced ZET-TECHNO nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚ (optimal angle for this flow), with or no front jet
Power unit weight735 kg (without water tank)
Power unit dimensions, WхDхH1,350 х 1,460 х 1,245 mm (height is specified without muffler)
WarrantyFor engine - 5 years, for apparatus - 2 years

Poseidon D67S-160-160-Ku-Reel

High pressure cleaner POSEIDON on Skid frame (Kubota 67hp, pump UDOR (Italy), hydraulic drive hose reel, 19mm х 90m HP hose, 2 pipe cleaning nozzles, 1,000-litre water tank)

Working weight, kg

825.0

Contracted price




Brends

All brends

FEEDBACK FORM

SEND

Consultation

Enter your phone or email and we'll contact you!
Receive consultation

Send order

Enter your phone or email and we'll contact you!
SEND
Your request is sent successfully. We'll contact You soon.