Series of Poseidon D75S, apparatus, 75 hp, 160 – 310 bar, 75 – 160 l/min

Manufacturer: ZET-TECHNO (Russia)

Application:

Poseidon waterjet equipment is an available and modern solution of cleaning tasks. Due to the use of breakthrough Warthog slow rotation nozzles, the waterjet equipment is capable of cleaning the most heavily contaminated sewers.

Wide scope of application in all sectors of industry, agriculture, housing and utilities, construction and car service:

Hydrodynamic flushing and cleaning of sewers and other pipes
Washing and waterjet cleaning of any surfaces, including their preparation for coating
Washing vehicles (train cars, light vehicles and trucks, agriculture and construction machinery and self-propelled vehicles)
Cleaning and disinfection of floors, surfaces and equipment at food industry enterprises (meat plants, dairy factories, confectionery industry)
Washing of surfaces at livestock farms, poultry houses, pig farms
Cleaning of garbage chutes in buildings
Washing and removal of stucco, paint from building facades, recovery of facing slabs
Washing works at construction sites, cleaning of construction framework
Cleaning of roads, bridges, tunnels from contaminations, old coatings, insulation and congealed cement solution
Removal of bark from lumber
Washing of floors and outdoor sites
Washing of tanks and vessels

Price: руб. In stock

Delivery worldwide.

Add to basket

Consultation

Send order

Technical details:

Water supply	Technical water, max. 60°С (recommended - max. 45°С)
Apparatus parameters, bar@l/min (МPa@m3/h)	160 bar 160 l/min (16 МPa 9.6 m3/h)	185 bar 130 l/min (18.5 МPa 7.8 m3/h)	230 bar 100 l/min (23 МPa 6 m3/h)	310 bar 75 l/min (31 МPa 4.5 m3/h)
High pressure hose	90-meter long DN 19 mm			90-meter long DN 16 mm
Pressure adjustment	Available, fine (adjusting valve, By-pass system)
High pressure pump	Three ceramic plungers, crank-and-rod (Italy)
HP pump speed	1000 rpm (reduced speed increases the life of the pump and is necessary to power the pump by gravity from the water tank)
HP pump protection	Pump dry run protection
HP pump drive type	Belt drive with guard
Engine	4-cylinder diesel engine YANGDONG (China) with water cooling. Power - 75 hp (55 kW). Equipped with oil pressure drop protection. Fuel consumption - 16.7 l / h. Equipped with: Oil pressure drop protection. Engine speed indication Oil and coolant temperature indication Battery charge indication and hour meter
Fuel tank	Metal, capacity 35 liters. Equipped with a fuel level sensor with a pointer on the control panel. Allows you to quickly monitor the level of fuel in the tank and avoid a sudden shutdown of the engine.
Engine cooling and water heating	Water heat exchanger (without radiator) utilizing the heat generated by an engine for heating of water, which enhances the apparatus performance, especially in cold weather.
Climatic design	System for filling the pump and high-pressure line with antifreeze to protect against freezing during the cold season
Reel for HP hose	With direct drive (without a chain), which provides superior reliability and tremendous power characteristics. Traction force - 250 kgf. Reinforced reel with one-piece sidewalls, hydraulic drive and fine rotation speed adjustment. Hydraulic brake. Reel material - steel, powder coating. Equipped with a hose chain. Upon request, design with reel electrodrive with variable rotation speed (Electric options).
Reel design	On a revolution door with outreach length of 950 mm, fitted with a handy positioning mechanism made on the basis of an adjustable clamp, with rigid fixation in any working position (allows working within a range from 0 to 120 degrees), holding down a steel guide and withstanding torques of up to 1,000 Nm. Upon request, design featuring a fixed reel position (FIX option).
Water tank and tank filling and drainage system	1,000-litre tank, with a drain sensor that automatically shuts down the engine. The tank filling system with a bayonet-type inlet located on the operator side. Water drain from tank to operating side.
Suction hose	max. 50 meters long, DN19 mm (FR option)
Reel for suction hose	Stationary, hand-driven, accommodates hose up to 50 meters long and DN 19 mm (FR option)
Design	Vehicle-mounted frame. Power unit on shock mounts.
Water heating	Diesel boiler, 130 kW, 110,000 kcal/h (Th130 option)
Nozzles are included (in "Reel" delivery set	Two enhanced ZET-TECHNO nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚ (optimal angle for this flow), with or no front jet
Power unit weight	949 kg (without water tank)
Power unit dimensions, WхDхH	1,375 х 1,630 х 1,450 mm (height is specified without muffler)
Warranty	2 years

Description:

Features:

Authorization from pump manufacturer

UDOR (Italy)

Annovi Reverberi (Italy)

Appealing price and excellent performance
High-pressure hoses included have a large nominal bore, which allows for use of longer hoses without any substantial pressure decrease
The heat exchanger of engine cooling provides for water heating up to 55°С (pump limit), if necessary. This feature substantially enhances the possibilities of the apparatus, especially in cold weather
Shutdown gauges when the apparatus is out of water in the tank or oil in the engine in standard delivery set
Standard delivery set includes a reel on revolution door with hydraulic drive, speed control and a 90-meter HP hose
Upon request, mounting on a van or car trailer. Installation of special laboratory, repair truck. Acquisition of vehicle logbook for a special vehicle
Installation of extra water tanks
Upon request, standard and rotary nozzles with a preset location and number of holes.

Recommended accessories:

	Top guiding roller Protects a high-pressure sleeve from damages and premature wear at the time it enters a sewage well or drain shaft (to be installed on the top edge of the pit cover)
	Protective sleeve for HP hose Protects HP sleeve from damages and premature wear at the time it enters a pipe (it is set in the place where well walls mate the pipe being cleaned). It has a bright color and is fitted with clamping device.
	Grenade tip/Bomb Outstanding clog busting characteristics due to the smaller slant angle of output water jet, which ensures high output speed. Application: removal of loose stony deposits, gravel, and soft deposits, preparation before use of special nozzles, flushing of pipes coming from structures to a main pipeline.
	Chisel tip Forward jets wash out softer deposits; wedge-shaped design improves its penetration performance and allows for a more efficient removal of clogging; rear water jet provides for thrust and pipe flushing. Application: cleaning of pipes from intertwined roots, freeing of frozen pipelines from buildings to a main pipeline.
	Fluke bottom tip Its heaviness and rear-located nozzles allow efficiently washing out debris from the pipe bottom. Application: for cleaning of sand, pebble, stone and sludge deposits
	Aquadrill tip with forward rotary jet The tip features a powerful rotating front nozzle, which is especially effective when removing blockages and cleaning of fully clogged pipes. Application: removal of heavy cloggings (blockages)
	StoneAge Warthog slow rotation rotary tip (USA). Due to slow rotation and leakproofness, water creates a local region of high pressure on the surface of deposit and by penetrating inside tears apart the contamination structure from inside Application: for elimination of emergency blockages

Video

Basic configurations

Poseidon D75S-230-100-Yn-Reel-Basе

High pressure cleaner POSEIDON on Skid frame (Angdong 75hp, pump UDOR (Italy), hydraulic drive hose reel, 19mm х 90m HP hose, 2 pipe cleaning nozzles, without water tank)

Working weight, kg

825.0

Contracted price

Add to basket

Technical details:

Water supply	Technical water, max. 60°С (recommended - max. 45°С)
Apparatus parameters, bar@l/min (МPa@m3/h)	160 bar 160 l/min (16 МPa 9.6 m3/h)	185 bar 130 l/min (18.5 МPa 7.8 m3/h)	230 bar 100 l/min (23 МPa 6 m3/h)	310 bar 75 l/min (31 МPa 4.5 m3/h)
High pressure hose	90-meter long DN 19 mm			90-meter long DN 16 mm
Pressure adjustment	Available, fine (adjusting valve, By-pass system)
High pressure pump	Three ceramic plungers, crank-and-rod (Italy)
HP pump speed	1000 rpm (reduced speed increases the life of the pump and is necessary to power the pump by gravity from the water tank)
HP pump protection	Pump dry run protection
HP pump drive type	Belt drive with guard
Engine	4-cylinder diesel engine YANGDONG (China) with water cooling. Power - 75 hp (55 kW). Equipped with oil pressure drop protection. Fuel consumption - 16.7 l / h. Equipped with: Oil pressure drop protection. Engine speed indication Oil and coolant temperature indication Battery charge indication and hour meter
Fuel tank	Metal, capacity 35 liters. Equipped with a fuel level sensor with a pointer on the control panel. Allows you to quickly monitor the level of fuel in the tank and avoid a sudden shutdown of the engine.
Engine cooling and water heating	Water heat exchanger (without radiator) utilizing the heat generated by an engine for heating of water, which enhances the apparatus performance, especially in cold weather.
Climatic design	System for filling the pump and high-pressure line with antifreeze to protect against freezing during the cold season
Reel for HP hose	With direct drive (without a chain), which provides superior reliability and tremendous power characteristics. Traction force - 250 kgf. Reinforced reel with one-piece sidewalls, hydraulic drive and fine rotation speed adjustment. Hydraulic brake. Reel material - steel, powder coating. Equipped with a hose chain. Upon request, design with reel electrodrive with variable rotation speed (Electric options).
Reel design	On a revolution door with outreach length of 950 mm, fitted with a handy positioning mechanism made on the basis of an adjustable clamp, with rigid fixation in any working position (allows working within a range from 0 to 120 degrees), holding down a steel guide and withstanding torques of up to 1,000 Nm. Upon request, design featuring a fixed reel position (FIX option).
Water tank and tank filling and drainage system	1,000-litre tank, with a drain sensor that automatically shuts down the engine. The tank filling system with a bayonet-type inlet located on the operator side. Water drain from tank to operating side.
Suction hose	max. 50 meters long, DN19 mm (FR option)
Reel for suction hose	Stationary, hand-driven, accommodates hose up to 50 meters long and DN 19 mm (FR option)
Design	Vehicle-mounted frame. Power unit on shock mounts.
Water heating	Diesel boiler, 130 kW, 110,000 kcal/h (Th130 option)
Nozzles are included (in "Reel" delivery set	Two enhanced ZET-TECHNO nozzles made of surgical steel 40X13 with a rear jet pattern of 30˚ (optimal angle for this flow), with or no front jet
Power unit weight	949 kg (without water tank)
Power unit dimensions, WхDхH	1,375 х 1,630 х 1,450 mm (height is specified without muffler)
Warranty	2 years

Poseidon D75S-230-100-Yn-Reel-Basе

High pressure cleaner POSEIDON on Skid frame (Angdong 75hp, pump UDOR (Italy), hydraulic drive hose reel, 19mm х 90m HP hose, 2 pipe cleaning nozzles, without water tank)

Working weight, kg

825.0

Contracted price

Add to basket